APRS Track Direct

My position About ☰

reset

IQ3PN-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3PN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Volt*
1836274782	100 Pkt	560 Pkt	0.08 Pcnt	13.04 Volt
1836274482	87 Pkt	570 Pkt	0.08 Pcnt	13.04 Volt
1836274332	87 Pkt	560 Pkt	0.08 Pcnt	13.04 Volt
1836274182	77 Pkt	570 Pkt	0.08 Pcnt	13.04 Volt
1836273882	100 Pkt	590 Pkt	0.08 Pcnt	13.04 Volt
1762329187	104 Pkt	600 Pkt	0.19 Pcnt	13.11 Volt
1762328887	110 Pkt	590 Pkt	0.19 Pcnt	13.11 Volt
1762328587	104 Pkt	560 Pkt	0.19 Pcnt	13.11 Volt
1762328287	96 Pkt	540 Pkt	0.19 Pcnt	13.11 Volt
1762327987	85 Pkt	530 Pkt	0.19 Pcnt	13.11 Volt
1762327687	91 Pkt	540 Pkt	0.19 Pcnt	13.11 Volt
1762327387	97 Pkt	550 Pkt	0.19 Pcnt	13.11 Volt
1762327087	83 Pkt	550 Pkt	0.19 Pcnt	13.11 Volt
1762326787	95 Pkt	560 Pkt	0.19 Pcnt	13.11 Volt
1762326487	96 Pkt	580 Pkt	0.19 Pcnt	13.11 Volt
1762326187	67 Pkt	580 Pkt	0.19 Pcnt	13.11 Volt
1762325887	78 Pkt	590 Pkt	0.19 Pcnt	13.11 Volt
1762325587	68 Pkt	610 Pkt	0.19 Pcnt	13.11 Volt
1762325287	58 Pkt	630 Pkt	0.19 Pcnt	13.11 Volt
1762324987	80 Pkt	660 Pkt	0.19 Pcnt	13.11 Volt
1762324687	95 Pkt	680 Pkt	0.19 Pcnt	13.11 Volt
1762324387	95 Pkt	690 Pkt	0.19 Pcnt	13.11 Volt
1762324087	100 Pkt	690 Pkt	0.19 Pcnt	13.11 Volt
1762323787	109 Pkt	700 Pkt	0.19 Pcnt	13.11 Volt
1762323487	119 Pkt	700 Pkt	0.19 Pcnt	13.11 Volt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Volt: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)