This is the latest recevied telemetry packets stored in our database for station/object ED1YCF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758204441 | 552 | 0 | 0 | 0 | 0 |
| 1758201938 | 552 | 0 | 0 | 0 | 0 |
| 1758199456 | 552 | 0 | 0 | 0 | 0 |
| 1758196945 | 551 | 0 | 0 | 0 | 0 |
| 1758194440 | 552 | 0 | 0 | 0 | 0 |
| 1758191930 | 592 | 0 | 0 | 0 | 0 |
| 1758189414 | 589 | 0 | 0 | 0 | 0 |
| 1758186866 | 553 | 0 | 0 | 0 | 0 |
| 1758184347 | 539 | 0 | 0 | 0 | 0 |
| 1758181812 | 527 | 0 | 0 | 0 | 0 |
| 1758179296 | 512 | 0 | 0 | 0 | 0 |
| 1758176772 | 493 | 0 | 0 | 0 | 0 |
| 1758174262 | 492 | 0 | 0 | 0 | 0 |
| 1758171756 | 492 | 0 | 0 | 0 | 0 |
| 1758169239 | 493 | 0 | 0 | 0 | 0 |
| 1758166704 | 493 | 0 | 0 | 0 | 0 |
| 1758164170 | 493 | 0 | 0 | 0 | 0 |
| 1758161636 | 494 | 0 | 0 | 0 | 0 |
| 1758159127 | 489 | 0 | 0 | 0 | 0 |
| 1758156631 | 485 | 0 | 0 | 0 | 0 |
| 1758154123 | 496 | 0 | 0 | 0 | 0 |
| 1758151623 | 496 | 0 | 0 | 0 | 0 |
| 1758149121 | 486 | 0 | 0 | 0 | 0 |
| 1758146633 | 497 | 0 | 0 | 0 | 0 |
| 1758144136 | 488 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)