This is the latest recevied telemetry packets stored in our database for station/object SP2SGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762299159 | 195 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762298258 | 194 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762297358 | 193 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762296457 | 192 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762295557 | 191 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762294656 | 190 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762293755 | 189 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762292855 | 188 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762291954 | 187 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762291053 | 186 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762290153 | 185 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762289252 | 184 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762288352 | 183 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762287451 | 182 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762286550 | 181 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762285650 | 180 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762284749 | 179 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762283848 | 178 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762282948 | 177 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762282047 | 176 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762281161 | 175 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762280261 | 174 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762279360 | 173 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762278459 | 172 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762277559 | 171 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)