This is the latest recevied telemetry packets stored in our database for station/object EL-EA3RKD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274343 | 0 | 30 | 0 | 1 | 0 |
| 1836274193 | 0 | 58 | 0 | 3 | 0 |
| 1778048384 | 531 | 50 | 17 | 17 | 0 |
| 1778047784 | 655 | 51 | 12 | 12 | 0 |
| 1778047184 | 606 | 17 | 8 | 8 | 0 |
| 1778046584 | 872 | 31 | 8 | 8 | 0 |
| 1778045984 | 681 | 38 | 4 | 5 | 0 |
| 1778045384 | 738 | 17 | 9 | 8 | 0 |
| 1778044784 | 3 | 20 | 1 | 3 | 0 |
| 1778044184 | 3 | 31 | 1 | 3 | 0 |
| 1778043584 | 6 | 7 | 2 | 4 | 0 |
| 1778042984 | 3 | 19 | 1 | 2 | 0 |
| 1778042384 | 36 | 34 | 1 | 3 | 0 |
| 1778041784 | 0 | 0 | 0 | 0 | 0 |
| 1778041184 | 0 | 17 | 0 | 1 | 0 |
| 1778040584 | 3 | 31 | 1 | 3 | 0 |
| 1778039984 | 3 | 4 | 1 | 2 | 0 |
| 1778039384 | 10 | 24 | 2 | 5 | 0 |
| 1778038784 | 3 | 34 | 1 | 3 | 0 |
| 1778038184 | 0 | 0 | 0 | 0 | 0 |
| 1778037584 | 3 | 20 | 1 | 3 | 0 |
| 1778036984 | 3 | 31 | 1 | 3 | 0 |
| 1778036384 | 6 | 7 | 2 | 4 | 0 |
| 1778034584 | 6 | 7 | 2 | 4 | 0 |
| 1778033984 | 3 | 20 | 1 | 3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)