This is the latest recevied telemetry packets stored in our database for station/object SP5BS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758202385 | 830 Count | 192 Count | 0 Count | 3.67 VDC | 0.14 VDC |
| 1758201482 | 829 Count | 192 Count | 0 Count | 3.68 VDC | 0.14 VDC |
| 1758200579 | 828 Count | 192 Count | 0 Count | 3.69 VDC | 0.14 VDC |
| 1758199676 | 827 Count | 192 Count | 0 Count | 3.69 VDC | 0.14 VDC |
| 1758198773 | 826 Count | 192 Count | 0 Count | 3.69 VDC | 0.14 VDC |
| 1758197870 | 825 Count | 192 Count | 0 Count | 3.69 VDC | 0.14 VDC |
| 1758196967 | 814 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1758196875 | 813 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1758196759 | 811 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1758195856 | 810 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1758195609 | 809 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1758195206 | 808 Count | 192 Count | 0 Count | 3.7 VDC | 0.14 VDC |
| 1758194464 | 807 Count | 192 Count | 0 Count | 3.71 VDC | 0.14 VDC |
| 1758193561 | 806 Count | 192 Count | 0 Count | 3.71 VDC | 0.14 VDC |
| 1758192659 | 805 Count | 192 Count | 0 Count | 3.71 VDC | 0.14 VDC |
| 1758191777 | 804 Count | 192 Count | 0 Count | 3.71 VDC | 0.14 VDC |
| 1758190874 | 803 Count | 192 Count | 0 Count | 3.72 VDC | 0.14 VDC |
| 1758189972 | 802 Count | 192 Count | 0 Count | 3.72 VDC | 0.14 VDC |
| 1758189069 | 801 Count | 192 Count | 0 Count | 3.73 VDC | 0.14 VDC |
| 1758188166 | 800 Count | 192 Count | 0 Count | 3.73 VDC | 0.14 VDC |
| 1758187263 | 799 Count | 192 Count | 0 Count | 3.74 VDC | 0.14 VDC |
| 1758186361 | 798 Count | 192 Count | 0 Count | 3.74 VDC | 0.14 VDC |
| 1758185458 | 797 Count | 192 Count | 0 Count | 3.74 VDC | 0.14 VDC |
| 1758184577 | 796 Count | 192 Count | 0 Count | 3.74 VDC | 0.14 VDC |
| 1758183675 | 795 Count | 192 Count | 0 Count | 3.75 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)