APRS Track Direct

My position About ☰

reset

VE3EJP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE3EJP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790632188	13.95 Volt	180 Pkt	80 Pkt	55 Pcnt
1790632186	13.95 Volt	180 Pkt	80 Pkt	55 Pcnt
1790631886	13.95 Volt	180 Pkt	80 Pkt	54 Pcnt
1790631588	13.95 Volt	180 Pkt	80 Pkt	55 Pcnt
1790631586	13.95 Volt	180 Pkt	80 Pkt	55 Pcnt
1790631286	13.95 Volt	180 Pkt	80 Pkt	56 Pcnt
1790630988	13.95 Volt	180 Pkt	80 Pkt	56 Pcnt
1790630986	13.95 Volt	180 Pkt	80 Pkt	56 Pcnt
1790630686	13.95 Volt	170 Pkt	80 Pkt	56 Pcnt
1790630386	13.95 Volt	180 Pkt	80 Pkt	55 Pcnt
1790630086	13.95 Volt	180 Pkt	80 Pkt	54 Pcnt
1790629788	13.95 Volt	180 Pkt	80 Pkt	54 Pcnt
1790629786	13.95 Volt	180 Pkt	80 Pkt	54 Pcnt
1790629486	13.95 Volt	180 Pkt	80 Pkt	52 Pcnt
1790629188	13.95 Volt	180 Pkt	90 Pkt	53 Pcnt
1790629186	13.95 Volt	180 Pkt	90 Pkt	53 Pcnt
1790628886	13.95 Volt	190 Pkt	90 Pkt	53 Pcnt
1790628588	13.95 Volt	200 Pkt	100 Pkt	54 Pcnt
1790628586	13.95 Volt	200 Pkt	100 Pkt	54 Pcnt
1790628286	13.95 Volt	210 Pkt	100 Pkt	55 Pcnt
1790627988	13.95 Volt	210 Pkt	100 Pkt	56 Pcnt
1790627986	13.95 Volt	210 Pkt	100 Pkt	56 Pcnt
1790627686	13.95 Volt	230 Pkt	110 Pkt	57 Pcnt
1790627388	13.95 Volt	230 Pkt	110 Pkt	58 Pcnt
1790627386	13.95 Volt	230 Pkt	110 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)