This is the latest recevied telemetry packets stored in our database for station/object KF4KUL-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274160 | 402 | 625 | 0 | 0 | 0 |
| 1778045014 | 402 | 618 | 0 | 0 | 0 |
| 1778043221 | 403 | 619 | 0 | 0 | 0 |
| 1778041427 | 403 | 620 | 0 | 0 | 0 |
| 1778039634 | 403 | 621 | 0 | 0 | 0 |
| 1778037840 | 403 | 622 | 0 | 0 | 0 |
| 1778036047 | 403 | 624 | 0 | 0 | 0 |
| 1778034253 | 403 | 626 | 0 | 0 | 0 |
| 1778032459 | 403 | 629 | 0 | 0 | 0 |
| 1778030664 | 404 | 631 | 0 | 0 | 0 |
| 1778028870 | 403 | 633 | 0 | 0 | 0 |
| 1778027075 | 404 | 636 | 0 | 0 | 0 |
| 1778025279 | 404 | 639 | 0 | 0 | 0 |
| 1778023483 | 405 | 643 | 0 | 0 | 0 |
| 1778021687 | 405 | 647 | 0 | 0 | 0 |
| 1778019890 | 405 | 653 | 0 | 0 | 0 |
| 1778018092 | 406 | 659 | 0 | 0 | 0 |
| 1778016293 | 405 | 659 | 0 | 0 | 0 |
| 1778014495 | 407 | 657 | 0 | 0 | 0 |
| 1778012697 | 407 | 654 | 0 | 0 | 0 |
| 1778010900 | 406 | 646 | 0 | 0 | 0 |
| 1778009104 | 452 | 638 | 0 | 0 | 0 |
| 1778009091 | 454 | 638 | 0 | 0 | 0 |
| 1778009057 | 452 | 638 | 0 | 0 | 0 |
| 1778009036 | 453 | 638 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)