This is the latest recevied telemetry packets stored in our database for station/object KF6YGK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758217886 | 433 | 616 | 0 | 0 | 0 |
| 1758216093 | 434 | 614 | 0 | 0 | 0 |
| 1758214301 | 434 | 614 | 0 | 0 | 0 |
| 1758212510 | 434 | 613 | 0 | 0 | 0 |
| 1758210718 | 434 | 614 | 0 | 0 | 0 |
| 1758208928 | 434 | 613 | 0 | 0 | 0 |
| 1758205345 | 435 | 613 | 0 | 0 | 0 |
| 1758203554 | 435 | 614 | 0 | 0 | 0 |
| 1758201762 | 436 | 615 | 0 | 0 | 0 |
| 1758199970 | 435 | 615 | 0 | 0 | 0 |
| 1758198179 | 436 | 615 | 0 | 0 | 0 |
| 1758196388 | 437 | 616 | 0 | 0 | 0 |
| 1758194596 | 437 | 617 | 0 | 0 | 0 |
| 1758192804 | 442 | 621 | 0 | 0 | 0 |
| 1758191011 | 439 | 619 | 0 | 0 | 0 |
| 1758189219 | 441 | 621 | 0 | 0 | 0 |
| 1758187426 | 490 | 626 | 0 | 0 | 0 |
| 1758185632 | 467 | 626 | 0 | 0 | 0 |
| 1758183839 | 454 | 626 | 0 | 0 | 0 |
| 1758182046 | 452 | 626 | 0 | 0 | 0 |
| 1758180251 | 453 | 627 | 0 | 0 | 0 |
| 1758178458 | 467 | 629 | 0 | 0 | 0 |
| 1758176663 | 465 | 627 | 0 | 0 | 0 |
| 1758174870 | 462 | 627 | 0 | 0 | 0 |
| 1758173078 | 452 | 628 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)