APRS Track Direct

My position About ☰

reset

F5OZP-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5OZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Text*	moyT.J*	varT.J*	Tint*	RHint*
1762295546	14.34 C	13.01 C	18.2 C	16.01 C	85 %
1762295239	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762294930	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762294622	14.34 C	13.01 C	18.2 C	16.34 C	86 %
1762294322	14.34 C	13.01 C	18.2 C	16.34 C	86 %
1762294010	14.34 C	13.01 C	18.2 C	16.34 C	86 %
1762293702	14.34 C	13.01 C	18.2 C	16.34 C	86 %
1762293394	14.34 C	13.01 C	18.2 C	16.34 C	86 %
1762293086	14.67 C	13.01 C	18.2 C	16.34 C	85 %
1762292778	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762292478	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762292161	14.01 C	13.01 C	18.2 C	16.34 C	85 %
1762291853	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762291545	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762291236	14.67 C	13.01 C	18.2 C	16.34 C	85 %
1762290928	14.67 C	13.01 C	18.2 C	16.34 C	85 %
1762290629	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762290316	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762290008	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762289700	14.01 C	13.01 C	18.2 C	16.34 C	86 %
1762289392	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762289084	14.34 C	13.01 C	18.2 C	16.34 C	85 %
1762288784	14.01 C	13.01 C	18.2 C	16.34 C	85 %
1762288467	14.34 C	13.01 C	18.2 C	16.34 C	84 %
1762288159	14.34 C	13.01 C	18.2 C	16.68 C	84 %

*Used Equation Coefficients:

Text: 0, 0.3334, -25

moyT.J: 0, 0.3334, -25

varT.J: 0, 0.2, 0

Tint: 0, 0.3334, -25

RHint: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)