APRS Track Direct

My position About ☰

reset

GM7AFE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object GM7AFE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Dg1h*	Eff1h*	A4*	A5*
1745141207	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745140907	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745140606	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745140306	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745140006	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745139705	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745139405	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745139105	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745138804	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745138504	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745138204	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745137904	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745137603	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745137303	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745137003	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745136702	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745136402	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745136102	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745135802	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745135501	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745135201	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745134901	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745134600	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745134300	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts
1745134000	0 Pkt	0 Pkt	0 Pcnt	0 Volts	0 Volts

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)