APRS Track Direct

My position About ☰

reset

KC3ARY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery Voltage*	Battery Current*	Load Current*	Solar Voltage*
1778043346	12.9 V	311 mA	-286 mA	0 V
1778042748	12.91 V	291 mA	-265 mA	0 V
1778042148	12.91 V	302 mA	-277 mA	0 V
1778041548	12.91 V	303 mA	-278 mA	0 V
1778040948	12.92 V	291 mA	-265 mA	0 V
1778040348	12.92 V	292 mA	-267 mA	0 V
1778039746	12.92 V	296 mA	-271 mA	0 V
1778039153	12.93 V	287 mA	-261 mA	0 V
1778038553	12.93 V	293 mA	-266 mA	0 V
1778037954	12.93 V	300 mA	-275 mA	0 V
1778037354	12.93 V	301 mA	-276 mA	0 V
1778036749	12.93 V	305 mA	-280 mA	0 V
1778036147	12.93 V	321 mA	-297 mA	0 V
1778035549	12.94 V	300 mA	-275 mA	0 V
1778034949	12.94 V	304 mA	-279 mA	0 V
1778034349	12.95 V	291 mA	-266 mA	0 V
1778033749	12.95 V	286 mA	-260 mA	0 V
1778033148	12.96 V	281 mA	-256 mA	0 V
1778032546	12.96 V	291 mA	-266 mA	0.01 V
1778031948	12.96 V	289 mA	-265 mA	0.02 V
1778031348	12.96 V	292 mA	-268 mA	0.05 V
1778030748	12.97 V	294 mA	-271 mA	0.13 V
1778030148	12.97 V	290 mA	-265 mA	0.37 V
1778029549	12.97 V	300 mA	-274 mA	0.99 V
1778028947	12.98 V	302 mA	-272 mA	2.58 V

*Used Equation Coefficients:

Battery Voltage: 0, 0.01, 0

Battery Current: 0, 1, -4096

Load Current: 0, 1, -4096

Solar Voltage: 0, 0.01, 0

Solar Current: 0, 1, -4096

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)