APRS Track Direct

My position About ☰

reset

SR8ULZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8ULZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx10m*	Dg10m*	Eff1h*	Eff*
1790641730	12.38 Volt	65 Pkt	15 Pkt	77 Pcnt	78 Pcnt
1790638126	12.38 Volt	76 Pkt	24 Pkt	76 Pcnt	78 Pcnt
1790634523	12.38 Volt	61 Pkt	21 Pkt	74 Pcnt	78 Pcnt
1790630920	12.38 Volt	52 Pkt	16 Pkt	75 Pcnt	79 Pcnt
1790627316	12.38 Volt	80 Pkt	35 Pkt	69 Pcnt	79 Pcnt
1790623713	12.38 Volt	54 Pkt	14 Pkt	72 Pcnt	79 Pcnt
1790620109	12.38 Volt	61 Pkt	16 Pkt	78 Pcnt	79 Pcnt
1790616506	12.38 Volt	52 Pkt	17 Pkt	76 Pcnt	79 Pcnt
1790612903	12.38 Volt	57 Pkt	19 Pkt	79 Pcnt	79 Pcnt
1790609299	12.38 Volt	48 Pkt	24 Pkt	84 Pcnt	79 Pcnt
1790605696	12.38 Volt	53 Pkt	27 Pkt	78 Pcnt	79 Pcnt
1790602092	12.38 Volt	45 Pkt	17 Pkt	79 Pcnt	79 Pcnt
1790598489	12.38 Volt	45 Pkt	17 Pkt	79 Pcnt	79 Pcnt
1790594886	12.38 Volt	70 Pkt	27 Pkt	78 Pcnt	79 Pcnt
1790591282	12.38 Volt	43 Pkt	11 Pkt	79 Pcnt	79 Pcnt
1790587679	12.38 Volt	53 Pkt	23 Pkt	77 Pcnt	79 Pcnt
1790584075	12.38 Volt	79 Pkt	38 Pkt	67 Pcnt	79 Pcnt
1790580472	12.38 Volt	78 Pkt	33 Pkt	74 Pcnt	79 Pcnt
1790576869	12.38 Volt	86 Pkt	42 Pkt	78 Pcnt	79 Pcnt
1790573266	12.38 Volt	68 Pkt	32 Pkt	80 Pcnt	79 Pcnt
1790569662	12.38 Volt	76 Pkt	28 Pkt	78 Pcnt	79 Pcnt
1790566058	12.38 Volt	70 Pkt	35 Pkt	76 Pcnt	79 Pcnt
1790562455	12.38 Volt	66 Pkt	35 Pkt	78 Pcnt	79 Pcnt
1790558851	12.38 Volt	53 Pkt	27 Pkt	74 Pcnt	79 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)