This is the latest recevied telemetry packets stored in our database for station/object IW1BPT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rete* | Batt1* | Batt2* | Temp* | Hum* |
|---|---|---|---|---|---|
| 1792150818 | 230 Volt | 13.5 Volt | 0 Volt | 22.5 GrdC | 47 %hum |
| 1792150221 | 230 Volt | 13.5 Volt | 0 Volt | 22.75 GrdC | 47 %hum |
| 1792149625 | 230 Volt | 13.5 Volt | 0 Volt | 22.5 GrdC | 47 %hum |
| 1792149029 | 230 Volt | 13.5 Volt | 0 Volt | 22.75 GrdC | 47 %hum |
| 1792148432 | 230 Volt | 13.5 Volt | 0 Volt | 22.75 GrdC | 47 %hum |
| 1792147836 | 230 Volt | 13.5 Volt | 0 Volt | 22.75 GrdC | 47 %hum |
| 1792147240 | 230 Volt | 13.5 Volt | 0 Volt | 23 GrdC | 47 %hum |
| 1792146643 | 230 Volt | 13.5 Volt | 0 Volt | 23 GrdC | 47 %hum |
| 1792146047 | 230 Volt | 13.5 Volt | 0 Volt | 22.75 GrdC | 47.5 %hum |
| 1792145451 | 230 Volt | 13.5 Volt | 0 Volt | 22.75 GrdC | 47.5 %hum |
| 1792144854 | 230 Volt | 13.5 Volt | 0 Volt | 22.75 GrdC | 47.5 %hum |
| 1792144258 | 230 Volt | 13.5 Volt | 0 Volt | 22.5 GrdC | 47.5 %hum |
| 1792143662 | 230 Volt | 13.5 Volt | 0 Volt | 22.5 GrdC | 47.5 %hum |
| 1792143065 | 230 Volt | 13.5 Volt | 0 Volt | 22.5 GrdC | 47.5 %hum |
| 1792142469 | 230 Volt | 13.5 Volt | 0 Volt | 22.25 GrdC | 48 %hum |
| 1792141873 | 230 Volt | 13.5 Volt | 0 Volt | 22.25 GrdC | 48 %hum |
| 1792141277 | 230 Volt | 13.5 Volt | 0 Volt | 22.25 GrdC | 48 %hum |
| 1792140680 | 230 Volt | 13.5 Volt | 0 Volt | 22.25 GrdC | 47.5 %hum |
| 1792140084 | 230 Volt | 13.5 Volt | 0 Volt | 22 GrdC | 47.5 %hum |
| 1792139488 | 230 Volt | 13.5 Volt | 0 Volt | 22 GrdC | 48 %hum |
| 1792138892 | 230 Volt | 13.5 Volt | 0 Volt | 21.75 GrdC | 48 %hum |
| 1792138290 | 230 Volt | 13.5 Volt | 0 Volt | 21.75 GrdC | 48 %hum |
| 1792137694 | 230 Volt | 13.5 Volt | 0 Volt | 21.5 GrdC | 48 %hum |
| 1792137097 | 230 Volt | 13.5 Volt | 0 Volt | 21.5 GrdC | 48 %hum |
| 1792136501 | 230 Volt | 13.5 Volt | 0 Volt | 21.5 GrdC | 48 %hum |
*Used Equation Coefficients:
Rete: 0, 1, 0
Batt1: 0, 0.1, 0
Batt2: 0, 0.1, 0
Temp: 0, 0.25, -20.5
Hum: 0, 0.5, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)