This is the latest recevied telemetry packets stored in our database for station/object TA1EE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1836274805 | 0 Pkt | 13 Pkt | 0 Pkt | -46 dBm | 0 V |
| 1836274436 | 0 Pkt | 7 Pkt | 0 Pkt | -47 dBm | 0 V |
| 1836274357 | 0 Pkt | 7 Pkt | 0 Pkt | -45 dBm | 0 V |
| 1836274123 | 0 Pkt | 12 Pkt | 0 Pkt | -46 dBm | 0 V |
| 1762286085 | 0 Pkt | 6 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1762285762 | 0 Pkt | 3 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1762285440 | 0 Pkt | 8 Pkt | 0 Pkt | -40 dBm | 0 V |
| 1762285117 | 0 Pkt | 9 Pkt | 0 Pkt | -42 dBm | 0 V |
| 1762284795 | 0 Pkt | 3 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1762284473 | 0 Pkt | 8 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1762284128 | 0 Pkt | 2 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1762284008 | 0 Pkt | 6 Pkt | 0 Pkt | -42 dBm | 0 V |
| 1762283684 | 0 Pkt | 6 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1762283362 | 0 Pkt | 8 Pkt | 0 Pkt | -42 dBm | 0 V |
| 1762283040 | 0 Pkt | 3 Pkt | 0 Pkt | -44 dBm | 0 V |
| 1762282909 | 0 Pkt | 4 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1762282595 | 0 Pkt | 7 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1762282503 | 0 Pkt | 10 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1762282180 | 0 Pkt | 4 Pkt | 0 Pkt | -44 dBm | 0 V |
| 1762281858 | 0 Pkt | 9 Pkt | 0 Pkt | -42 dBm | 0 V |
| 1762281536 | 0 Pkt | 9 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1762281213 | 0 Pkt | 5 Pkt | 0 Pkt | -42 dBm | 0 V |
| 1762280891 | 0 Pkt | 8 Pkt | 0 Pkt | -42 dBm | 0 V |
| 1762280569 | 0 Pkt | 8 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1762280246 | 0 Pkt | 3 Pkt | 0 Pkt | -39 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)