APRS Track Direct

My position About ☰

reset

OD5RI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OD5RI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753931143	13.43 Volt	70 Pkt	30 Pkt	57 Pcnt
1753930843	13.5 Volt	80 Pkt	40 Pkt	59 Pcnt
1753930843	13.5 Volt	80 Pkt	40 Pkt	59 Pcnt
1753930543	12.6 Volt	70 Pkt	30 Pkt	55 Pcnt
1753930243	13.5 Volt	70 Pkt	30 Pkt	54 Pcnt
1753930243	13.5 Volt	70 Pkt	30 Pkt	54 Pcnt
1753929943	13.43 Volt	60 Pkt	30 Pkt	54 Pcnt
1753929644	13.2 Volt	50 Pkt	30 Pkt	51 Pcnt
1753929643	13.2 Volt	50 Pkt	30 Pkt	51 Pcnt
1753929343	13.5 Volt	60 Pkt	30 Pkt	50 Pcnt
1753929043	13.43 Volt	50 Pkt	30 Pkt	49 Pcnt
1753929043	13.43 Volt	50 Pkt	30 Pkt	49 Pcnt
1753928743	13.43 Volt	40 Pkt	20 Pkt	49 Pcnt
1753928444	13.35 Volt	40 Pkt	20 Pkt	45 Pcnt
1753928443	13.35 Volt	40 Pkt	20 Pkt	45 Pcnt
1753928143	13.5 Volt	30 Pkt	20 Pkt	40 Pcnt
1753927843	12.98 Volt	30 Pkt	20 Pkt	34 Pcnt
1753927843	12.98 Volt	30 Pkt	20 Pkt	34 Pcnt
1753927543	13.43 Volt	30 Pkt	20 Pkt	31 Pcnt
1753927243	13.43 Volt	20 Pkt	20 Pkt	26 Pcnt
1753927243	13.43 Volt	20 Pkt	20 Pkt	26 Pcnt
1753926943	13.5 Volt	20 Pkt	20 Pkt	26 Pcnt
1753926643	13.5 Volt	20 Pkt	20 Pkt	26 Pcnt
1753926643	13.5 Volt	20 Pkt	20 Pkt	26 Pcnt
1753926343	13.43 Volt	30 Pkt	20 Pkt	28 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)