APRS Track Direct

My position About ☰

reset

YO8M-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO8M-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1750113470	12.9 Volt	30 Pkt	20 Pkt	100 Pcnt	35 C
1750112570	12.9 Volt	30 Pkt	0 Pkt	100 Pcnt	35 C
1750111669	12.9 Volt	30 Pkt	20 Pkt	100 Pcnt	35 C
1750110768	12.9 Volt	0 Pkt	0 Pkt	100 Pcnt	35 C
1750109867	12.9 Volt	30 Pkt	20 Pkt	100 Pcnt	35 C
1750108966	12.9 Volt	30 Pkt	0 Pkt	100 Pcnt	35 C
1750108066	12.9 Volt	30 Pkt	20 Pkt	100 Pcnt	35.5 C
1750107165	12.9 Volt	0 Pkt	0 Pkt	100 Pcnt	35 C
1750106264	12.9 Volt	30 Pkt	20 Pkt	100 Pcnt	35.5 C
1750105363	12.9 Volt	30 Pkt	0 Pkt	95 Pcnt	35.5 C
1750104462	12.9 Volt	40 Pkt	30 Pkt	96 Pcnt	35.5 C
1750103561	12.9 Volt	0 Pkt	0 Pkt	97 Pcnt	35.5 C
1750102660	12.9 Volt	70 Pkt	40 Pkt	98 Pcnt	35.5 C
1750101759	12.9 Volt	120 Pkt	10 Pkt	100 Pcnt	35.5 C
1750100859	12.9 Volt	60 Pkt	20 Pkt	100 Pcnt	35.5 C
1750099958	12.9 Volt	70 Pkt	20 Pkt	101 Pcnt	35.5 C
1750099057	12.9 Volt	90 Pkt	30 Pkt	100 Pcnt	36 C
1750098156	12.9 Volt	130 Pkt	10 Pkt	100 Pcnt	35.5 C
1750097255	12.9 Volt	70 Pkt	20 Pkt	100 Pcnt	36 C
1750096354	12.9 Volt	50 Pkt	0 Pkt	100 Pcnt	36 C
1750095453	12.9 Volt	80 Pkt	30 Pkt	100 Pcnt	36 C
1750094553	12.9 Volt	130 Pkt	10 Pkt	100 Pcnt	36 C
1750093652	12.9 Volt	160 Pkt	50 Pkt	100 Pcnt	36 C
1750092751	12.9 Volt	50 Pkt	0 Pkt	100 Pcnt	36 C
1750091850	12.9 Volt	70 Pkt	30 Pkt	100 Pcnt	36 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)