APRS Track Direct

My position About ☰

reset

N3LLO-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N3LLO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1754125819	0.22 Rx Erlang	0 Tx Erlang	191 count/10m	33 count/10m	0 count/10m
1754124619	0.23 Rx Erlang	0 Tx Erlang	200 count/10m	26 count/10m	0 count/10m
1754123419	0.19 Rx Erlang	0 Tx Erlang	175 count/10m	26 count/10m	0 count/10m
1754122219	0.21 Rx Erlang	0 Tx Erlang	184 count/10m	29 count/10m	0 count/10m
1754121019	0.21 Rx Erlang	0 Tx Erlang	197 count/10m	25 count/10m	0 count/10m
1754119819	0.21 Rx Erlang	0 Tx Erlang	193 count/10m	18 count/10m	0 count/10m
1754118619	0.22 Rx Erlang	0 Tx Erlang	194 count/10m	24 count/10m	0 count/10m
1754117418	0.22 Rx Erlang	0 Tx Erlang	203 count/10m	22 count/10m	0 count/10m
1754116219	0.21 Rx Erlang	0 Tx Erlang	197 count/10m	18 count/10m	0 count/10m
1754115019	0.2 Rx Erlang	0 Tx Erlang	180 count/10m	17 count/10m	0 count/10m
1754113819	0.23 Rx Erlang	0 Tx Erlang	213 count/10m	17 count/10m	0 count/10m
1754112619	0.21 Rx Erlang	0 Tx Erlang	195 count/10m	16 count/10m	0 count/10m
1754111419	0.25 Rx Erlang	0 Tx Erlang	212 count/10m	49 count/10m	0 count/10m
1754110219	0.18 Rx Erlang	0 Tx Erlang	173 count/10m	19 count/10m	0 count/10m
1754109019	0.2 Rx Erlang	0 Tx Erlang	178 count/10m	13 count/10m	0 count/10m
1754107819	0.21 Rx Erlang	0 Tx Erlang	196 count/10m	24 count/10m	0 count/10m
1754106619	0.22 Rx Erlang	0 Tx Erlang	203 count/10m	22 count/10m	0 count/10m
1754105419	0.2 Rx Erlang	0 Tx Erlang	184 count/10m	22 count/10m	0 count/10m
1754104219	0.2 Rx Erlang	0 Tx Erlang	184 count/10m	22 count/10m	0 count/10m
1754103019	0.2 Rx Erlang	0 Tx Erlang	181 count/10m	19 count/10m	0 count/10m
1754101819	0.2 Rx Erlang	0 Tx Erlang	183 count/10m	14 count/10m	0 count/10m
1754100619	0.2 Rx Erlang	0 Tx Erlang	204 count/10m	20 count/10m	0 count/10m
1754099419	0.21 Rx Erlang	0 Tx Erlang	202 count/10m	26 count/10m	0 count/10m
1754098219	0.23 Rx Erlang	0 Tx Erlang	200 count/10m	25 count/10m	0 count/10m
1754097019	0.21 Rx Erlang	0 Tx Erlang	201 count/10m	18 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)