This is the latest recevied telemetry packets stored in our database for station/object SQ4LOL-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | PM2.5* | PM10* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274708 | 8.3 ug/m3 | 11.2 ug/m3 | 0 | 0 | 0 |
| 1836274560 | 7.4 ug/m3 | 9.5 ug/m3 | 0 | 0 | 0 |
| 1836274106 | 8.3 ug/m3 | 11.2 ug/m3 | 0 | 0 | 0 |
| 1774082890 | 2.1 ug/m3 | 5.4 ug/m3 | 0 | 0 | 0 |
| 1774082288 | 2 ug/m3 | 4.7 ug/m3 | 0 | 0 | 0 |
| 1774081686 | 2.8 ug/m3 | 5.8 ug/m3 | 0 | 0 | 0 |
| 1774081084 | 2.8 ug/m3 | 5.8 ug/m3 | 0 | 0 | 0 |
| 1774080482 | 3.5 ug/m3 | 6.5 ug/m3 | 0 | 0 | 0 |
| 1774079880 | 4.4 ug/m3 | 7.2 ug/m3 | 0 | 0 | 0 |
| 1774079278 | 4.4 ug/m3 | 7.2 ug/m3 | 0 | 0 | 0 |
| 1774078676 | 4.6 ug/m3 | 7.6 ug/m3 | 0 | 0 | 0 |
| 1774078074 | 6.4 ug/m3 | 12.3 ug/m3 | 0 | 0 | 0 |
| 1774077472 | 6.4 ug/m3 | 12.3 ug/m3 | 0 | 0 | 0 |
| 1774076872 | 8.9 ug/m3 | 16.2 ug/m3 | 0 | 0 | 0 |
| 1774076268 | 4.3 ug/m3 | 7.2 ug/m3 | 0 | 0 | 0 |
| 1774075665 | 4.3 ug/m3 | 7.2 ug/m3 | 0 | 0 | 0 |
| 1774075063 | 7.4 ug/m3 | 9.8 ug/m3 | 0 | 0 | 0 |
| 1774074462 | 11 ug/m3 | 13.3 ug/m3 | 0 | 0 | 0 |
| 1774073859 | 11 ug/m3 | 13.3 ug/m3 | 0 | 0 | 0 |
| 1774073257 | 7.3 ug/m3 | 11.2 ug/m3 | 0 | 0 | 0 |
| 1774072655 | 9.3 ug/m3 | 12.5 ug/m3 | 0 | 0 | 0 |
| 1774072053 | 9.3 ug/m3 | 12.5 ug/m3 | 0 | 0 | 0 |
| 1774071451 | 16.5 ug/m3 | 20.2 ug/m3 | 0 | 0 | 0 |
| 1774070849 | 9.9 ug/m3 | 15.9 ug/m3 | 0 | 0 | 0 |
| 1774070247 | 9.9 ug/m3 | 15.9 ug/m3 | 0 | 0 | 0 |
*Used Equation Coefficients:
PM2.5: 0, 1, 0
PM10: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)