This is the latest recevied telemetry packets stored in our database for station/object G3CWI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766290163 | 10.38 VDC | 0 | 0 | 0 | 0 |
| 1766286563 | 10.4 VDC | 0 | 0 | 0 | 0 |
| 1766282963 | 10.46 VDC | 0 | 0 | 0 | 0 |
| 1766279363 | 11.12 VDC | 0 | 0 | 0 | 0 |
| 1766275763 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1766272163 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1766268563 | 12.34 VDC | 0 | 0 | 0 | 0 |
| 1766264962 | 12.34 VDC | 0 | 0 | 0 | 0 |
| 1766261362 | 12.36 VDC | 0 | 0 | 0 | 0 |
| 1766257762 | 12.38 VDC | 0 | 0 | 0 | 0 |
| 1766254162 | 12.42 VDC | 0 | 0 | 0 | 0 |
| 1766250562 | 12.44 VDC | 0 | 0 | 0 | 0 |
| 1766246962 | 12.52 VDC | 0 | 0 | 0 | 0 |
| 1766243362 | 13.38 VDC | 0 | 0 | 0 | 0 |
| 1766239761 | 13.92 VDC | 0 | 0 | 0 | 0 |
| 1766236161 | 13.94 VDC | 0 | 0 | 0 | 0 |
| 1766232561 | 13.92 VDC | 0 | 0 | 0 | 0 |
| 1766228961 | 11.46 VDC | 0 | 0 | 0 | 0 |
| 1766225361 | 10.76 VDC | 0 | 0 | 0 | 0 |
| 1766221762 | 10.22 VDC | 0 | 0 | 0 | 0 |
| 1766218161 | 10.04 VDC | 0 | 0 | 0 | 0 |
| 1766217141 | 10.04 VDC | 0 | 0 | 0 | 0 |
| 1766216059 | 10.02 VDC | 0 | 0 | 0 | 0 |
| 1766212459 | 10.04 VDC | 0 | 0 | 0 | 0 |
| 1766208859 | 10.06 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)