APRS Track Direct

My position About ☰

reset

E22KKC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1753727990	10 Pkt	0 Pkt	-49 dBm	1.13 V
1753726165	12 Pkt	0 Pkt	-48 dBm	0.9 V
1753724339	12 Pkt	0 Pkt	-49 dBm	1.05 V
1753722513	9 Pkt	0 Pkt	-48 dBm	0.86 V
1753720688	12 Pkt	0 Pkt	-49 dBm	0.94 V
1753718862	10 Pkt	0 Pkt	-49 dBm	1.13 V
1753717037	9 Pkt	0 Pkt	-48 dBm	1.15 V
1753715212	13 Pkt	2 Pkt	-49 dBm	0.78 V
1753713386	9 Pkt	0 Pkt	-49 dBm	0.98 V
1753711560	11 Pkt	0 Pkt	-48 dBm	0.84 V
1753709735	9 Pkt	0 Pkt	-49 dBm	0.7 V
1753707909	10 Pkt	0 Pkt	-49 dBm	0.9 V
1753706084	21 Pkt	0 Pkt	-51 dBm	0.82 V
1753704258	4 Pkt	0 Pkt	-51 dBm	0.64 V
1753702432	5 Pkt	0 Pkt	-52 dBm	0.76 V
1753700607	4 Pkt	0 Pkt	-51 dBm	0.66 V
1753698782	8 Pkt	0 Pkt	-51 dBm	0.86 V
1753696957	7 Pkt	0 Pkt	-48 dBm	0.68 V
1753695131	6 Pkt	0 Pkt	-51 dBm	0.84 V
1753693305	3 Pkt	0 Pkt	-51 dBm	0.92 V
1753691479	7 Pkt	0 Pkt	-51 dBm	0.92 V
1753689654	5 Pkt	0 Pkt	-51 dBm	0.7 V
1753687828	1 Pkt	0 Pkt	-51 dBm	0.76 V
1753687515	8 Pkt	0 Pkt	-50 dBm	0.94 V
1753685690	3 Pkt	0 Pkt	-52 dBm	0.86 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)