APRS Track Direct

My position About ☰

reset

IU1FIL-22 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU1FIL-22. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*	Ampere Aux*
1750183439	20 Pkt/10m	8 Pkt/10m	4.59 Volt	13.6 Volt	-0.03 Ampere
1750182834	22 Pkt/10m	5 Pkt/10m	4.66 Volt	13.7 Volt	-0.01 Ampere
1750182230	18 Pkt/10m	7 Pkt/10m	4.61 Volt	13.7 Volt	0 Ampere
1750181626	18 Pkt/10m	8 Pkt/10m	4.61 Volt	13.7 Volt	0.01 Ampere
1750181022	17 Pkt/10m	7 Pkt/10m	4.63 Volt	13.7 Volt	0.05 Ampere
1750180418	18 Pkt/10m	6 Pkt/10m	4.63 Volt	13.8 Volt	0.04 Ampere
1750179814	23 Pkt/10m	11 Pkt/10m	4.61 Volt	13.8 Volt	0.08 Ampere
1750179210	18 Pkt/10m	6 Pkt/10m	4.61 Volt	13.7 Volt	-0.08 Ampere
1750178606	19 Pkt/10m	5 Pkt/10m	4.61 Volt	13.8 Volt	-0.01 Ampere
1750178002	18 Pkt/10m	8 Pkt/10m	4.59 Volt	13.7 Volt	-0.08 Ampere
1750177397	21 Pkt/10m	6 Pkt/10m	4.59 Volt	13.8 Volt	0.08 Ampere
1750176793	19 Pkt/10m	6 Pkt/10m	4.61 Volt	13.8 Volt	0.11 Ampere
1750176189	23 Pkt/10m	6 Pkt/10m	4.61 Volt	13.7 Volt	0.1 Ampere
1750175585	15 Pkt/10m	3 Pkt/10m	4.61 Volt	13.7 Volt	-0.08 Ampere
1750174981	23 Pkt/10m	5 Pkt/10m	4.61 Volt	13.7 Volt	-0.08 Ampere
1750174377	24 Pkt/10m	6 Pkt/10m	4.61 Volt	13.7 Volt	0.19 Ampere
1750173773	21 Pkt/10m	7 Pkt/10m	4.61 Volt	13.7 Volt	-0.08 Ampere
1750173169	19 Pkt/10m	6 Pkt/10m	4.61 Volt	13.7 Volt	-0.08 Ampere
1750172564	25 Pkt/10m	6 Pkt/10m	4.61 Volt	13.7 Volt	-0.08 Ampere
1750171960	29 Pkt/10m	6 Pkt/10m	4.61 Volt	13.7 Volt	-0.08 Ampere
1750171357	31 Pkt/10m	6 Pkt/10m	4.59 Volt	13.7 Volt	-0.08 Ampere
1750170752	36 Pkt/10m	6 Pkt/10m	4.61 Volt	13.8 Volt	-0.08 Ampere
1750170148	30 Pkt/10m	7 Pkt/10m	4.61 Volt	13.7 Volt	-0.08 Ampere
1750169544	27 Pkt/10m	7 Pkt/10m	4.61 Volt	13.8 Volt	-0.08 Ampere
1750168940	29 Pkt/10m	5 Pkt/10m	4.61 Volt	13.8 Volt	0 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)