This is the latest recevied telemetry packets stored in our database for station/object SANJUANWL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753580405 | 1194 | 0 | 0 | 0 | 0 |
| 1753579805 | 1193 | 0 | 0 | 0 | 0 |
| 1753579204 | 1192 | 0 | 0 | 0 | 0 |
| 1753578605 | 1191 | 0 | 0 | 0 | 0 |
| 1753578004 | 1188 | 0 | 0 | 0 | 0 |
| 1753577405 | 1186 | 0 | 0 | 0 | 0 |
| 1753576807 | 1182 | 0 | 0 | 0 | 0 |
| 1753576204 | 1180 | 0 | 0 | 0 | 0 |
| 1753575607 | 1178 | 0 | 0 | 0 | 0 |
| 1753575007 | 1175 | 0 | 0 | 0 | 0 |
| 1753574405 | 1175 | 0 | 0 | 0 | 0 |
| 1753573805 | 1176 | 0 | 0 | 0 | 0 |
| 1753573204 | 1173 | 0 | 0 | 0 | 0 |
| 1753572604 | 1172 | 0 | 0 | 0 | 0 |
| 1753572004 | 1167 | 0 | 0 | 0 | 0 |
| 1753571404 | 1164 | 0 | 0 | 0 | 0 |
| 1753570806 | 1162 | 0 | 0 | 0 | 0 |
| 1753570205 | 1162 | 0 | 0 | 0 | 0 |
| 1753569608 | 1161 | 0 | 0 | 0 | 0 |
| 1753568406 | 1158 | 0 | 0 | 0 | 0 |
| 1753567806 | 1156 | 0 | 0 | 0 | 0 |
| 1753567208 | 1155 | 0 | 0 | 0 | 0 |
| 1753566604 | 1155 | 0 | 0 | 0 | 0 |
| 1753566005 | 1154 | 0 | 0 | 0 | 0 |
| 1753565406 | 1153 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)