This is the latest recevied telemetry packets stored in our database for station/object OE6POD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778041315 | 6.6 deg C | 80.5 % | 1012.2 hPa | 0 | 0 |
| 1778005197 | 13.9 deg C | 56.9 % | 1008.3 hPa | 0 | 0 |
| 1778004789 | 14.2 deg C | 56.4 % | 1008.1 hPa | 0 | 0 |
| 1778003888 | 14.6 deg C | 54.7 % | 1007.9 hPa | 0 | 0 |
| 1778002988 | 14.8 deg C | 54.3 % | 1007.7 hPa | 0 | 0 |
| 1778002092 | 15 deg C | 53.9 % | 1007.6 hPa | 0 | 0 |
| 1778001188 | 15.4 deg C | 53.3 % | 1007.6 hPa | 0 | 0 |
| 1778000288 | 15.9 deg C | 52.2 % | 1007.6 hPa | 0 | 0 |
| 1777999388 | 16.8 deg C | 50.4 % | 1007.3 hPa | 0 | 0 |
| 1777998488 | 16.1 deg C | 51.3 % | 1007.3 hPa | 0 | 0 |
| 1777997588 | 16.6 deg C | 50.4 % | 1007.5 hPa | 0 | 0 |
| 1777996688 | 16.3 deg C | 50.4 % | 1007.7 hPa | 0 | 0 |
| 1777996355 | 16.4 deg C | 49.8 % | 1007.7 hPa | 0 | 0 |
| 1777995455 | 16.8 deg C | 48.7 % | 1007.6 hPa | 0 | 0 |
| 1777994555 | 16.5 deg C | 49 % | 1007.8 hPa | 0 | 0 |
| 1777993655 | 16.3 deg C | 49.2 % | 1007.7 hPa | 0 | 0 |
| 1777992755 | 17 deg C | 46.7 % | 1007.4 hPa | 0 | 0 |
| 1777991854 | 17.7 deg C | 45.2 % | 1007.2 hPa | 0 | 0 |
| 1777990954 | 17.3 deg C | 45.9 % | 1007.4 hPa | 0 | 0 |
| 1777990054 | 17.4 deg C | 45.4 % | 1007.4 hPa | 0 | 0 |
| 1777989154 | 17.8 deg C | 44.6 % | 1007.4 hPa | 0 | 0 |
| 1777988254 | 17.8 deg C | 45.4 % | 1007.5 hPa | 0 | 0 |
| 1777987354 | 18.4 deg C | 43.8 % | 1007.6 hPa | 0 | 0 |
| 1777986454 | 19.1 deg C | 41.9 % | 1007.4 hPa | 0 | 0 |
| 1777985554 | 19.4 deg C | 41.4 % | 1007.4 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)