APRS Track Direct

My position About ☰

reset

HS9UAC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9UAC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1790657071	22 ug/m3	26 ug/m3	42 ug/m3	-42 dBm	6.01 V
1790656146	22 ug/m3	28 ug/m3	41 ug/m3	-42 dBm	6.01 V
1790655221	20 ug/m3	30 ug/m3	47 ug/m3	-42 dBm	6.01 V
1790654297	35 ug/m3	36 ug/m3	54 ug/m3	-42 dBm	6.01 V
1790653372	25 ug/m3	32 ug/m3	42 ug/m3	-42 dBm	6.05 V
1790652448	18 ug/m3	23 ug/m3	32 ug/m3	-43 dBm	6.01 V
1790651523	24 ug/m3	27 ug/m3	44 ug/m3	-44 dBm	6.01 V
1790650599	18 ug/m3	23 ug/m3	33 ug/m3	-41 dBm	6.03 V
1790649673	21 ug/m3	26 ug/m3	36 ug/m3	-40 dBm	6.01 V
1790648346	22 ug/m3	22 ug/m3	36 ug/m3	-41 dBm	6.01 V
1790647421	16 ug/m3	23 ug/m3	33 ug/m3	-43 dBm	6.01 V
1790646497	16 ug/m3	19 ug/m3	29 ug/m3	-42 dBm	6.07 V
1790645572	15 ug/m3	17 ug/m3	27 ug/m3	-42 dBm	6.01 V
1790644648	20 ug/m3	20 ug/m3	27 ug/m3	-39 dBm	5.87 V
1790643723	24 ug/m3	24 ug/m3	34 ug/m3	-40 dBm	5.84 V
1790642798	18 ug/m3	22 ug/m3	29 ug/m3	-40 dBm	6.01 V
1790641873	18 ug/m3	23 ug/m3	34 ug/m3	-40 dBm	6.01 V
1790640948	16 ug/m3	21 ug/m3	28 ug/m3	-41 dBm	6.01 V
1790640024	23 ug/m3	25 ug/m3	34 ug/m3	-42 dBm	5.84 V
1790639099	17 ug/m3	22 ug/m3	32 ug/m3	-47 dBm	6.01 V
1790638174	25 ug/m3	26 ug/m3	44 ug/m3	-41 dBm	6.03 V
1790637249	20 ug/m3	21 ug/m3	33 ug/m3	-38 dBm	6.01 V
1790636325	23 ug/m3	24 ug/m3	41 ug/m3	-44 dBm	6.05 V
1790635400	26 ug/m3	27 ug/m3	44 ug/m3	-43 dBm	6.07 V
1790634476	21 ug/m3	22 ug/m3	34 ug/m3	-45 dBm	6.03 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)