APRS Track Direct

My position About ☰

reset

KI5LVN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KI5LVN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274210	12.6 Volt	420 Pkt	140 Pkt	55 Pcnt
1762319617	12.68 Volt	1100 Pkt	210 Pkt	58 Pcnt
1762319318	12.68 Volt	1110 Pkt	210 Pkt	59 Pcnt
1762319317	12.68 Volt	1110 Pkt	210 Pkt	59 Pcnt
1762319017	12.68 Volt	1100 Pkt	210 Pkt	58 Pcnt
1762318728	12.68 Volt	1090 Pkt	210 Pkt	58 Pcnt
1762318717	12.68 Volt	1090 Pkt	210 Pkt	58 Pcnt
1762318417	12.68 Volt	1080 Pkt	210 Pkt	58 Pcnt
1762318119	12.68 Volt	1090 Pkt	220 Pkt	59 Pcnt
1762318117	12.68 Volt	1090 Pkt	220 Pkt	59 Pcnt
1762317817	12.68 Volt	1070 Pkt	220 Pkt	59 Pcnt
1762317524	12.68 Volt	1060 Pkt	210 Pkt	59 Pcnt
1762317517	12.68 Volt	1060 Pkt	210 Pkt	59 Pcnt
1762317217	12.68 Volt	1070 Pkt	220 Pkt	59 Pcnt
1762316924	12.68 Volt	1080 Pkt	220 Pkt	60 Pcnt
1762316917	12.68 Volt	1080 Pkt	220 Pkt	60 Pcnt
1762316618	12.68 Volt	1070 Pkt	220 Pkt	59 Pcnt
1762316324	12.68 Volt	1040 Pkt	220 Pkt	58 Pcnt
1762316317	12.68 Volt	1040 Pkt	220 Pkt	58 Pcnt
1762316017	12.68 Volt	1030 Pkt	210 Pkt	58 Pcnt
1762315721	12.68 Volt	1010 Pkt	210 Pkt	57 Pcnt
1762315717	12.68 Volt	1010 Pkt	210 Pkt	57 Pcnt
1762315418	12.68 Volt	1030 Pkt	210 Pkt	58 Pcnt
1762315124	12.68 Volt	1000 Pkt	210 Pkt	58 Pcnt
1762315118	12.68 Volt	1000 Pkt	210 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)