This is the latest recevied telemetry packets stored in our database for station/object N7AIL-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX_rate* | RelRate* | DrpRate* | Value5* |
|---|---|---|---|---|---|
| 1794905420 | 4.11 VDC | 184 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794904520 | 4.11 VDC | 200 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794903620 | 4.11 VDC | 196 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794902720 | 4.1 VDC | 352 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794901819 | 4.11 VDC | 276 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794900919 | 4.1 VDC | 292 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794900019 | 4.11 VDC | 300 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794899119 | 4.11 VDC | 220 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794898219 | 4.11 VDC | 220 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794897317 | 4.11 VDC | 192 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794896417 | 4.11 VDC | 228 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794895517 | 4.1 VDC | 180 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794894617 | 4.11 VDC | 180 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794893716 | 4.11 VDC | 164 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794892816 | 4.11 VDC | 140 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794891916 | 4.11 VDC | 168 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794891016 | 4.11 VDC | 140 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794890116 | 4.11 VDC | 180 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794889215 | 4.11 VDC | 188 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1794888315 | 4.11 VDC | 160 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)