APRS Track Direct

My position About ☰

reset

WP4RDA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WP4RDA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1750247729	0.41 Load	66.22 DegC	2811 Mb	4089 Pkt	2496 Pkt
1750245929	0.34 Load	65.24 DegC	2810 Mb	4163 Pkt	2504 Pkt
1750244129	0.4 Load	64.76 DegC	2811 Mb	4088 Pkt	2516 Pkt
1750242329	0.33 Load	65.24 DegC	2812 Mb	4028 Pkt	2471 Pkt
1750240529	0.33 Load	66.71 DegC	2813 Mb	4116 Pkt	2485 Pkt
1750238729	0.37 Load	66.22 DegC	2815 Mb	4073 Pkt	2486 Pkt
1750236929	0.37 Load	65.73 DegC	2811 Mb	4168 Pkt	2502 Pkt
1750235129	0.37 Load	66.22 DegC	3064 Mb	4154 Pkt	2496 Pkt
1750233329	0.24 Load	66.22 DegC	3065 Mb	3953 Pkt	2454 Pkt
1750231529	0.39 Load	66.71 DegC	3064 Mb	4258 Pkt	2537 Pkt
1750229729	0.42 Load	66.71 DegC	3066 Mb	4170 Pkt	2488 Pkt
1750227928	0.39 Load	67.68 DegC	3066 Mb	4272 Pkt	2539 Pkt
1750226128	0.44 Load	65.73 DegC	3067 Mb	4372 Pkt	2540 Pkt
1750224329	0.32 Load	65.24 DegC	3064 Mb	4250 Pkt	2517 Pkt
1750222530	0.32 Load	65.73 DegC	3069 Mb	4090 Pkt	2458 Pkt
1750220730	0.44 Load	66.22 DegC	3067 Mb	5070 Pkt	2519 Pkt
1750218929	0.33 Load	65.24 DegC	3068 Mb	4122 Pkt	2528 Pkt
1750217130	0.31 Load	65.24 DegC	3074 Mb	4079 Pkt	2532 Pkt
1750215329	0.41 Load	66.22 DegC	3071 Mb	4185 Pkt	2496 Pkt
1750213529	0.4 Load	64.76 DegC	3070 Mb	4204 Pkt	2561 Pkt
1750211729	0.34 Load	65.73 DegC	3074 Mb	4747 Pkt	3321 Pkt
1750206183	0.4 Load	65.73 DegC	2750 Mb	3263 Pkt	1211 Pkt
1750204383	0.42 Load	67.19 DegC	2744 Mb	2023 Pkt	1229 Pkt
1750202583	0.48 Load	66.71 DegC	2749 Mb	2449 Pkt	1296 Pkt
1750200783	0.45 Load	65.73 DegC	2748 Mb	2047 Pkt	1212 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)