This is the latest recevied telemetry packets stored in our database for station/object SR4X-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762301523 | 390 | 1 | 308 | 0 | 0 |
| 1762301403 | 400 | 1 | 318 | 0 | 0 |
| 1762301283 | 480 | 1 | 329 | 0 | 0 |
| 1762301163 | 500 | 1 | 329 | 0 | 0 |
| 1762301046 | 500 | 1 | 328 | 0 | 0 |
| 1762300926 | 500 | 1 | 328 | 0 | 0 |
| 1762300805 | 490 | 1 | 328 | 0 | 0 |
| 1762300683 | 490 | 1 | 327 | 0 | 0 |
| 1762300563 | 490 | 1 | 326 | 0 | 0 |
| 1762300443 | 490 | 1 | 326 | 0 | 0 |
| 1762300323 | 490 | 1 | 326 | 0 | 0 |
| 1762300203 | 500 | 1 | 325 | 0 | 0 |
| 1762300082 | 500 | 1 | 325 | 0 | 0 |
| 1762299963 | 490 | 1 | 324 | 0 | 0 |
| 1762299843 | 490 | 1 | 323 | 0 | 0 |
| 1762299727 | 500 | 1 | 322 | 0 | 0 |
| 1762299603 | 490 | 1 | 321 | 0 | 0 |
| 1762299483 | 490 | 1 | 321 | 0 | 0 |
| 1762299363 | 490 | 1 | 320 | 0 | 0 |
| 1762299242 | 490 | 1 | 320 | 0 | 0 |
| 1762299123 | 490 | 1 | 318 | 0 | 0 |
| 1762299003 | 490 | 1 | 318 | 0 | 0 |
| 1762298882 | 490 | 1 | 316 | 0 | 0 |
| 1762298763 | 490 | 1 | 315 | 0 | 0 |
| 1762298643 | 480 | 1 | 314 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)