This is the latest recevied telemetry packets stored in our database for station/object DO9HM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750164982 | 26.1 deg C | 44.5 % | 1023.6 hPa | 0 | 0 |
| 1750163182 | 26.3 deg C | 45.2 % | 1023.7 hPa | 0 | 0 |
| 1750162282 | 25.3 deg C | 46.1 % | 1023.9 hPa | 0 | 0 |
| 1750161387 | 24.6 deg C | 46.2 % | 1024.2 hPa | 0 | 0 |
| 1750160488 | 25.4 deg C | 44.8 % | 1024.2 hPa | 0 | 0 |
| 1750159592 | 26 deg C | 45.8 % | 1024.3 hPa | 0 | 0 |
| 1750158688 | 24.3 deg C | 46.8 % | 1024.7 hPa | 0 | 0 |
| 1750157785 | 25 deg C | 45.5 % | 1024.6 hPa | 0 | 0 |
| 1750156888 | 25.7 deg C | 45.4 % | 1024.5 hPa | 0 | 0 |
| 1750155991 | 25.5 deg C | 45.9 % | 1024.6 hPa | 0 | 0 |
| 1750155089 | 24.3 deg C | 47.1 % | 1025 hPa | 0 | 0 |
| 1750154184 | 24 deg C | 47.9 % | 1025.3 hPa | 0 | 0 |
| 1750152381 | 24.8 deg C | 46.8 % | 1025.2 hPa | 0 | 0 |
| 1750151481 | 23.9 deg C | 48.6 % | 1025.3 hPa | 0 | 0 |
| 1750150584 | 24.8 deg C | 49.2 % | 1025.2 hPa | 0 | 0 |
| 1750149682 | 23.4 deg C | 51.6 % | 1025.5 hPa | 0 | 0 |
| 1750148779 | 22.4 deg C | 52.6 % | 1025.7 hPa | 0 | 0 |
| 1750147881 | 22.1 deg C | 54.5 % | 1025.7 hPa | 0 | 0 |
| 1750146977 | 21.3 deg C | 55.1 % | 1025.9 hPa | 0 | 0 |
| 1750146078 | 21.2 deg C | 56.1 % | 1026 hPa | 0 | 0 |
| 1750145173 | 20.8 deg C | 56.9 % | 1026 hPa | 0 | 0 |
| 1750144275 | 20.3 deg C | 57.2 % | 1026.1 hPa | 0 | 0 |
| 1750143367 | 19.8 deg C | 56.1 % | 1026.2 hPa | 0 | 0 |
| 1750142471 | 19.8 deg C | 54.1 % | 1026.2 hPa | 0 | 0 |
| 1750141572 | 21.4 deg C | 49.7 % | 1026 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)