This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1836274285 | 22 Count | 341 Count | 0 Count | 4 VDC | 0 VDC |
| 1774080622 | 48 Count | 332 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774078821 | 43 Count | 291 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774077020 | 37 Count | 245 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774075220 | 30 Count | 166 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774073419 | 18 Count | 111 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1774071619 | 10 Count | 53 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1774069818 | 180 Count | 1003 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1774068017 | 172 Count | 962 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1774066217 | 164 Count | 921 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1774064416 | 156 Count | 882 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774062615 | 147 Count | 842 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774060815 | 139 Count | 798 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774059014 | 132 Count | 735 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774057213 | 122 Count | 680 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774055413 | 115 Count | 621 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774053612 | 107 Count | 585 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1774051811 | 100 Count | 534 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774050011 | 92 Count | 487 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774048210 | 85 Count | 436 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774046409 | 79 Count | 390 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774044609 | 71 Count | 353 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774042808 | 62 Count | 310 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774041008 | 55 Count | 269 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1774037421 | 37 Count | 182 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)