This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1836274779 | 33 Count | 778 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1770135143 | 198 Count | 732 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1770133339 | 197 Count | 732 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1770131535 | 196 Count | 732 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1770129731 | 195 Count | 732 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1770127928 | 194 Count | 732 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1770126124 | 193 Count | 732 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1770124320 | 192 Count | 732 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1770122517 | 191 Count | 732 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1770120713 | 190 Count | 732 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1770118956 | 189 Count | 732 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1770117152 | 188 Count | 732 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1770115347 | 187 Count | 732 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1770113543 | 186 Count | 732 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1770111740 | 185 Count | 732 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1770109936 | 184 Count | 732 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1770108132 | 183 Count | 732 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1770106328 | 182 Count | 731 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1770104524 | 181 Count | 731 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1770102720 | 180 Count | 731 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1770100917 | 179 Count | 731 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1770099113 | 178 Count | 731 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1770097355 | 177 Count | 731 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1770095551 | 176 Count | 731 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1770093747 | 175 Count | 731 Count | 0 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)