APRS Track Direct

My position About ☰

reset

VA3CQC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3CQC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1745001621	0.07 Load	40 DegC	6419 Mb	3291 Pkt	306 Pkt
1744999821	0.03 Load	40 DegC	6403 Mb	3326 Pkt	324 Pkt
1744998021	0.5 Load	40 DegC	6413 Mb	3527 Pkt	345 Pkt
1744996222	0.12 Load	40 DegC	6405 Mb	3454 Pkt	352 Pkt
1744994422	0.35 Load	40 DegC	6412 Mb	3071 Pkt	397 Pkt
1744992622	0.38 Load	40 DegC	6422 Mb	3091 Pkt	349 Pkt
1744990822	0 Load	40 DegC	6427 Mb	2979 Pkt	332 Pkt
1744989022	0 Load	40 DegC	6411 Mb	2951 Pkt	313 Pkt
1744987222	0.08 Load	40 DegC	6411 Mb	3136 Pkt	326 Pkt
1744985422	0.13 Load	40 DegC	6416 Mb	3565 Pkt	406 Pkt
1744983622	0.15 Load	40 DegC	6421 Mb	3924 Pkt	332 Pkt
1744981822	0.59 Load	40 DegC	6421 Mb	3904 Pkt	328 Pkt
1744980022	0.2 Load	40 DegC	6422 Mb	3237 Pkt	315 Pkt
1744978222	0.03 Load	40 DegC	6432 Mb	3084 Pkt	336 Pkt
1744976422	0 Load	40 DegC	6425 Mb	2905 Pkt	254 Pkt
1744974622	0 Load	40 DegC	6428 Mb	2881 Pkt	238 Pkt
1744972822	0.52 Load	40 DegC	6411 Mb	2894 Pkt	239 Pkt
1744971021	0.02 Load	40 DegC	6413 Mb	2885 Pkt	236 Pkt
1744969221	0.05 Load	40 DegC	6414 Mb	2872 Pkt	230 Pkt
1744967421	0.26 Load	40 DegC	6414 Mb	2873 Pkt	229 Pkt
1744965621	0 Load	40 DegC	6414 Mb	2905 Pkt	247 Pkt
1744963821	0.43 Load	40 DegC	6417 Mb	2907 Pkt	245 Pkt
1744962021	0.26 Load	40 DegC	6417 Mb	2891 Pkt	226 Pkt
1744960221	0.1 Load	40 DegC	6417 Mb	2885 Pkt	232 Pkt
1744958421	0.27 Load	40 DegC	6417 Mb	2898 Pkt	230 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)