This is the latest recevied telemetry packets stored in our database for station/object A68AN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | CabinetTemp* | CabinetHum* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1754506925 | 41.4 C | 38 %RH | 0 | 0 | 0 |
1754505065 | 41.8 C | 34 %RH | 0 | 0 | 0 |
1754503205 | 42 C | 32 %RH | 0 | 0 | 0 |
1754501345 | 42.3 C | 34 %RH | 0 | 0 | 0 |
1754499485 | 42.7 C | 33 %RH | 0 | 0 | 0 |
1754497626 | 43.3 C | 33 %RH | 0 | 0 | 0 |
1754495765 | 44 C | 31 %RH | 0 | 0 | 0 |
1754493905 | 45.1 C | 28 %RH | 0 | 0 | 0 |
1754492046 | 46.5 C | 26 %RH | 0 | 0 | 0 |
1754490185 | 47.9 C | 25 %RH | 0 | 0 | 0 |
1754488325 | 49.4 C | 22 %RH | 0 | 0 | 0 |
1754486465 | 51.1 C | 19 %RH | 0 | 0 | 0 |
1754484605 | 53.5 C | 18 %RH | 0 | 0 | 0 |
1754482744 | 56.6 C | 16 %RH | 0 | 0 | 0 |
1754480885 | 58.4 C | 15 %RH | 0 | 0 | 0 |
1754479025 | 58.9 C | 13 %RH | 0 | 0 | 0 |
1754477165 | 58.9 C | 12 %RH | 0 | 0 | 0 |
1754466006 | 53.7 C | 15 %RH | 0 | 0 | 0 |
1754438105 | 40.1 C | 34 %RH | 0 | 0 | 0 |
1754436246 | 40.1 C | 32 %RH | 0 | 0 | 0 |
1754434385 | 40.1 C | 34 %RH | 0 | 0 | 0 |
1754432525 | 40.5 C | 35 %RH | 0 | 0 | 0 |
1754430665 | 40.6 C | 35 %RH | 0 | 0 | 0 |
1754428805 | 40.4 C | 31 %RH | 0 | 0 | 0 |
1754425085 | 40.4 C | 34 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
CabinetTemp: 0, 0.1, 0
CabinetHum: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)