APRS Track Direct

My position About ☰

reset

IS0ANU-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IS0ANU-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1786727705	12 Pkt	160 Pkt	3 Pkt	2.09 Pcnt	73 Pcnt
1786727405	11 Pkt	170 Pkt	3 Pkt	2.09 Pcnt	73 Pcnt
1786727105	14 Pkt	170 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786726805	11 Pkt	170 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786726505	11 Pkt	160 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786726205	19 Pkt	160 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786725905	33 Pkt	160 Pkt	3 Pkt	2.09 Pcnt	73 Pcnt
1786725605	48 Pkt	150 Pkt	3 Pkt	2.09 Pcnt	73 Pcnt
1786725305	46 Pkt	130 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786725005	37 Pkt	110 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786724705	39 Pkt	90 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786724405	33 Pkt	80 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786724105	14 Pkt	70 Pkt	3 Pkt	2.09 Pcnt	73 Pcnt
1786723805	11 Pkt	70 Pkt	3 Pkt	2.09 Pcnt	73 Pcnt
1786723505	10 Pkt	70 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786723205	7 Pkt	70 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786722905	6 Pkt	70 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786722605	4 Pkt	70 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786722305	8 Pkt	70 Pkt	3 Pkt	2.09 Pcnt	73 Pcnt
1786722005	9 Pkt	70 Pkt	3 Pkt	2.09 Pcnt	73 Pcnt
1786721705	8 Pkt	60 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786721405	20 Pkt	70 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786721105	25 Pkt	60 Pkt	2 Pkt	2.09 Pcnt	73 Pcnt
1786720805	14 Pkt	40 Pkt	1 Pkt	2.09 Pcnt	73 Pcnt
1786720505	10 Pkt	30 Pkt	0 Pkt	2.09 Pcnt	73 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)