APRS Track Direct

My position About ☰

reset

HP2PCE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP2PCE-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274435	13.65 Volt	160 Pkt	70 Pkt	49 Pcnt
1836274408	13.65 Volt	180 Pkt	70 Pkt	50 Pcnt
1765984683	13.65 Volt	180 Pkt	100 Pkt	67 Pcnt
1765983962	13.65 Volt	190 Pkt	100 Pkt	72 Pcnt
1765983242	13.65 Volt	220 Pkt	110 Pkt	74 Pcnt
1765982521	13.65 Volt	230 Pkt	120 Pkt	73 Pcnt
1765981800	13.65 Volt	220 Pkt	110 Pkt	72 Pcnt
1765981080	13.65 Volt	230 Pkt	110 Pkt	70 Pcnt
1765980359	13.65 Volt	240 Pkt	110 Pkt	68 Pcnt
1765979638	13.65 Volt	230 Pkt	110 Pkt	65 Pcnt
1765978918	13.58 Volt	230 Pkt	110 Pkt	64 Pcnt
1765978197	13.65 Volt	280 Pkt	130 Pkt	65 Pcnt
1765977476	13.65 Volt	270 Pkt	120 Pkt	67 Pcnt
1765976756	13.58 Volt	260 Pkt	120 Pkt	66 Pcnt
1765976035	13.65 Volt	280 Pkt	120 Pkt	68 Pcnt
1765975314	13.65 Volt	260 Pkt	110 Pkt	67 Pcnt
1765974593	13.65 Volt	210 Pkt	90 Pkt	66 Pcnt
1765973873	13.65 Volt	200 Pkt	90 Pkt	64 Pcnt
1765973153	13.58 Volt	220 Pkt	80 Pkt	63 Pcnt
1765972431	13.65 Volt	190 Pkt	80 Pkt	60 Pcnt
1765971711	13.65 Volt	200 Pkt	80 Pkt	62 Pcnt
1765970990	13.65 Volt	180 Pkt	80 Pkt	59 Pcnt
1765970269	13.65 Volt	190 Pkt	80 Pkt	57 Pcnt
1765969550	13.65 Volt	170 Pkt	80 Pkt	51 Pcnt
1765968828	13.65 Volt	160 Pkt	70 Pkt	48 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)