APRS Track Direct

My position About ☰

reset

K5FTW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K5FTW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1750199196	13.58 Volt	880 Pkt	240 Pkt	70 Pcnt
1750198898	13.58 Volt	870 Pkt	250 Pkt	70 Pcnt
1750198896	13.58 Volt	870 Pkt	250 Pkt	70 Pcnt
1750198596	13.58 Volt	880 Pkt	260 Pkt	70 Pcnt
1750198298	13.58 Volt	910 Pkt	270 Pkt	71 Pcnt
1750198296	13.58 Volt	910 Pkt	270 Pkt	71 Pcnt
1750197996	13.2 Volt	920 Pkt	270 Pkt	70 Pcnt
1750197697	13.58 Volt	950 Pkt	280 Pkt	70 Pcnt
1750197696	13.58 Volt	950 Pkt	280 Pkt	70 Pcnt
1750197396	13.2 Volt	950 Pkt	280 Pkt	70 Pcnt
1750197098	13.43 Volt	970 Pkt	290 Pkt	71 Pcnt
1750197096	13.43 Volt	970 Pkt	290 Pkt	71 Pcnt
1750196796	13.58 Volt	1000 Pkt	300 Pkt	71 Pcnt
1750196522	13.58 Volt	1020 Pkt	310 Pkt	70 Pcnt
1750196496	13.58 Volt	1020 Pkt	310 Pkt	70 Pcnt
1750196196	13.58 Volt	1050 Pkt	320 Pkt	70 Pcnt
1750195897	13.58 Volt	1070 Pkt	320 Pkt	71 Pcnt
1750195896	13.58 Volt	1070 Pkt	320 Pkt	71 Pcnt
1750195596	13.58 Volt	1090 Pkt	330 Pkt	71 Pcnt
1750195297	13.58 Volt	1110 Pkt	330 Pkt	71 Pcnt
1750195296	13.58 Volt	1110 Pkt	330 Pkt	71 Pcnt
1750194996	13.58 Volt	1140 Pkt	340 Pkt	71 Pcnt
1750194698	13.58 Volt	1120 Pkt	340 Pkt	70 Pcnt
1750194696	13.58 Volt	1120 Pkt	340 Pkt	70 Pcnt
1750194396	13.2 Volt	1110 Pkt	340 Pkt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)