APRS Track Direct

My position About ☰

reset

K1FFK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K1FFK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1778034332	13.95 Volt	540 Pkt	200 Pkt	45 Pcnt
1778032527	13.05 Volt	660 Pkt	270 Pkt	53 Pcnt
1778030725	13.95 Volt	710 Pkt	290 Pkt	56 Pcnt
1778028924	13.95 Volt	690 Pkt	270 Pkt	53 Pcnt
1778027125	13.95 Volt	720 Pkt	270 Pkt	52 Pcnt
1778025320	13.95 Volt	760 Pkt	280 Pkt	54 Pcnt
1778023519	13.95 Volt	780 Pkt	290 Pkt	57 Pcnt
1778021717	13.95 Volt	780 Pkt	290 Pkt	58 Pcnt
1778019915	13.95 Volt	780 Pkt	280 Pkt	57 Pcnt
1778018126	13.95 Volt	730 Pkt	230 Pkt	56 Pcnt
1778016314	13.95 Volt	680 Pkt	230 Pkt	55 Pcnt
1778014510	13.95 Volt	660 Pkt	240 Pkt	52 Pcnt
1778012709	13.95 Volt	660 Pkt	240 Pkt	52 Pcnt
1778010907	13.95 Volt	660 Pkt	230 Pkt	52 Pcnt
1778009105	13.95 Volt	660 Pkt	230 Pkt	52 Pcnt
1778007303	13.95 Volt	700 Pkt	240 Pkt	55 Pcnt
1778005501	13.95 Volt	700 Pkt	230 Pkt	54 Pcnt
1778003700	13.95 Volt	630 Pkt	230 Pkt	52 Pcnt
1778001899	13.95 Volt	610 Pkt	230 Pkt	50 Pcnt
1778000096	13.95 Volt	680 Pkt	270 Pkt	51 Pcnt
1777998295	13.95 Volt	710 Pkt	290 Pkt	53 Pcnt
1777996492	13.95 Volt	750 Pkt	290 Pkt	55 Pcnt
1777994691	13.95 Volt	770 Pkt	300 Pkt	55 Pcnt
1777992889	13.95 Volt	730 Pkt	290 Pkt	53 Pcnt
1777991088	13.95 Volt	680 Pkt	260 Pkt	52 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)