APRS Track Direct

My position About ☰

reset

W5IPA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W5IPA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753632063	14.18 Volt	180 Pkt	50 Pkt	100 Pcnt
1753632062	14.18 Volt	180 Pkt	50 Pkt	100 Pcnt
1753631462	14.1 Volt	180 Pkt	50 Pkt	100 Pcnt
1753630862	14.1 Volt	160 Pkt	30 Pkt	100 Pcnt
1753630265	14.1 Volt	170 Pkt	30 Pkt	98 Pcnt
1753630263	14.1 Volt	170 Pkt	30 Pkt	98 Pcnt
1753629662	14.1 Volt	180 Pkt	30 Pkt	98 Pcnt
1753629062	14.18 Volt	180 Pkt	30 Pkt	98 Pcnt
1753628463	14.1 Volt	210 Pkt	40 Pkt	99 Pcnt
1753628462	14.1 Volt	210 Pkt	40 Pkt	99 Pcnt
1753627863	14.1 Volt	230 Pkt	40 Pkt	99 Pcnt
1753627263	14.1 Volt	220 Pkt	40 Pkt	100 Pcnt
1753626662	14.1 Volt	230 Pkt	40 Pkt	99 Pcnt
1753626063	14.1 Volt	240 Pkt	50 Pkt	99 Pcnt
1753625463	14.18 Volt	250 Pkt	50 Pkt	99 Pcnt
1753624865	14.1 Volt	230 Pkt	40 Pkt	99 Pcnt
1753624863	14.1 Volt	230 Pkt	40 Pkt	99 Pcnt
1753624263	14.1 Volt	220 Pkt	40 Pkt	99 Pcnt
1753623663	14.18 Volt	240 Pkt	40 Pkt	99 Pcnt
1753623063	14.1 Volt	240 Pkt	40 Pkt	99 Pcnt
1753623063	14.1 Volt	240 Pkt	40 Pkt	99 Pcnt
1753622463	14.18 Volt	250 Pkt	40 Pkt	100 Pcnt
1753621863	14.18 Volt	260 Pkt	40 Pkt	100 Pcnt
1753621263	14.18 Volt	260 Pkt	40 Pkt	99 Pcnt
1753621263	14.18 Volt	260 Pkt	40 Pkt	99 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

TEMP: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)