This is the latest recevied telemetry packets stored in our database for station/object VA3XLT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Rx10m* |
---|---|---|---|---|---|
1754392890 | 12.6 Volt | 420 Pkt | 0 Pkt | 58 Pcnt | 122 Pkt |
1754392590 | 12.6 Volt | 380 Pkt | 0 Pkt | 55 Pcnt | 117 Pkt |
1754392290 | 12.6 Volt | 340 Pkt | 0 Pkt | 54 Pcnt | 105 Pkt |
1754391990 | 12.6 Volt | 330 Pkt | 0 Pkt | 54 Pcnt | 102 Pkt |
1754391690 | 12.6 Volt | 290 Pkt | 0 Pkt | 53 Pcnt | 58 Pkt |
1754391390 | 12.6 Volt | 280 Pkt | 0 Pkt | 54 Pcnt | 16 Pkt |
1754391090 | 12.6 Volt | 290 Pkt | 0 Pkt | 54 Pcnt | 3 Pkt |
1754390790 | 12.6 Volt | 320 Pkt | 0 Pkt | 59 Pcnt | 5 Pkt |
1754390490 | 12.6 Volt | 360 Pkt | 0 Pkt | 63 Pcnt | 23 Pkt |
1754390190 | 12.6 Volt | 410 Pkt | 0 Pkt | 67 Pcnt | 66 Pkt |
1754389890 | 12.6 Volt | 410 Pkt | 0 Pkt | 68 Pcnt | 79 Pkt |
1754389590 | 12.6 Volt | 410 Pkt | 0 Pkt | 68 Pcnt | 52 Pkt |
1754389290 | 12.6 Volt | 430 Pkt | 0 Pkt | 68 Pcnt | 51 Pkt |
1754388990 | 12.6 Volt | 460 Pkt | 0 Pkt | 70 Pcnt | 73 Pkt |
1754388690 | 12.6 Volt | 470 Pkt | 0 Pkt | 70 Pcnt | 61 Pkt |
1754388390 | 12.6 Volt | 480 Pkt | 0 Pkt | 69 Pcnt | 60 Pkt |
1754388090 | 12.6 Volt | 500 Pkt | 0 Pkt | 69 Pcnt | 45 Pkt |
1754387790 | 12.6 Volt | 510 Pkt | 0 Pkt | 69 Pcnt | 56 Pkt |
1754387491 | 12.6 Volt | 550 Pkt | 0 Pkt | 70 Pcnt | 70 Pkt |
1754387190 | 12.6 Volt | 560 Pkt | 0 Pkt | 69 Pcnt | 83 Pkt |
1754386891 | 12.6 Volt | 520 Pkt | 0 Pkt | 64 Pcnt | 69 Pkt |
1754386590 | 12.6 Volt | 490 Pkt | 0 Pkt | 63 Pcnt | 78 Pkt |
1754386290 | 12.6 Volt | 460 Pkt | 0 Pkt | 61 Pcnt | 92 Pkt |
1754385991 | 12.6 Volt | 470 Pkt | 0 Pkt | 61 Pcnt | 91 Pkt |
1754385691 | 12.6 Volt | 470 Pkt | 0 Pkt | 61 Pcnt | 88 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Rx10m: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)