APRS Track Direct

My position About ☰

reset

SP8EBC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8EBC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Rx10min*	Visc10min*	Digi10min*	Vbatt*	Tempre*
1762432573	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762431963	0 Pkt	0 Pkt	0 Pkt	12.12 V	0 DegC
1762431354	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762430744	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762429811	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC
1762429202	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762428589	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762427978	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762427368	0 Pkt	0 Pkt	0 Pkt	12.12 V	0 DegC
1762426759	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762426148	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC
1762425539	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC
1762424928	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC
1762424318	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC
1762423708	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762423098	0 Pkt	0 Pkt	0 Pkt	12.16 V	0 DegC
1762422489	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC
1762421876	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC
1762420947	0 Pkt	0 Pkt	0 Pkt	12.1 V	0 DegC
1762420337	0 Pkt	0 Pkt	0 Pkt	12.1 V	0 DegC
1762419727	0 Pkt	0 Pkt	0 Pkt	12.12 V	0 DegC
1762419117	0 Pkt	0 Pkt	0 Pkt	12.12 V	0 DegC
1762418507	0 Pkt	0 Pkt	0 Pkt	12.12 V	0 DegC
1762417898	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC
1762417288	0 Pkt	0 Pkt	0 Pkt	12.14 V	0 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Visc10min: 0, 1, 0

Digi10min: 0, 1, 0

Vbatt: 0, 0.02, 10

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)