This is the latest recevied telemetry packets stored in our database for station/object DL5NBU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790668885 | 15.4 deg C | 75.5 % | 1022 hPa | 0 | 0 |
| 1790668553 | 15 deg C | 76.6 % | 1022.1 hPa | 0 | 0 |
| 1790667653 | 14 deg C | 79.6 % | 1022.2 hPa | 0 | 0 |
| 1790666753 | 13.1 deg C | 84.1 % | 1022.3 hPa | 0 | 0 |
| 1790665853 | 12.2 deg C | 85.6 % | 1022.4 hPa | 0 | 0 |
| 1790664953 | 11.4 deg C | 89.6 % | 1022.6 hPa | 0 | 0 |
| 1790664053 | 10.3 deg C | 91.5 % | 1022.6 hPa | 0 | 0 |
| 1790663153 | 9.6 deg C | 94.3 % | 1022.8 hPa | 0 | 0 |
| 1790662253 | 9 deg C | 94.1 % | 1022.5 hPa | 0 | 0 |
| 1790661352 | 8.6 deg C | 92.8 % | 1022.4 hPa | 0 | 0 |
| 1790660452 | 8.7 deg C | 89.5 % | 1022.3 hPa | 0 | 0 |
| 1790659552 | 10 deg C | 85.5 % | 1022 hPa | 0 | 0 |
| 1790658652 | 10.1 deg C | 85.7 % | 1022 hPa | 0 | 0 |
| 1790657752 | 10.1 deg C | 85.5 % | 1022 hPa | 0 | 0 |
| 1790656852 | 10.2 deg C | 85.3 % | 1021.9 hPa | 0 | 0 |
| 1790656519 | 10.3 deg C | 85.2 % | 1022 hPa | 0 | 0 |
| 1790655619 | 10.4 deg C | 84.9 % | 1022.1 hPa | 0 | 0 |
| 1790654719 | 10.4 deg C | 84.9 % | 1022.1 hPa | 0 | 0 |
| 1790653819 | 10.5 deg C | 84.5 % | 1022.2 hPa | 0 | 0 |
| 1790652919 | 10.6 deg C | 84.6 % | 1022.1 hPa | 0 | 0 |
| 1790652019 | 10.6 deg C | 84.3 % | 1022.1 hPa | 0 | 0 |
| 1790651119 | 10.7 deg C | 84.2 % | 1022.1 hPa | 0 | 0 |
| 1790650218 | 10.7 deg C | 84 % | 1022.2 hPa | 0 | 0 |
| 1790649318 | 10.7 deg C | 83.9 % | 1022.2 hPa | 0 | 0 |
| 1790648418 | 10.8 deg C | 83.6 % | 1022.1 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)