This is the latest recevied telemetry packets stored in our database for station/object W4DMM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 1836274348 | 0.15 Rx Erlang | 0.05 Tx Erlang | 140 count/10m | 92 count/10m | 40 count/10m |
| 1836273900 | 0.17 Rx Erlang | 0.05 Tx Erlang | 157 count/10m | 109 count/10m | 40 count/10m |
| 1766238700 | 0.23 Rx Erlang | 0.06 Tx Erlang | 203 count/10m | 156 count/10m | 51 count/10m |
| 1766237498 | 0.2 Rx Erlang | 0.05 Tx Erlang | 191 count/10m | 143 count/10m | 44 count/10m |
| 1766236298 | 0.22 Rx Erlang | 0.06 Tx Erlang | 197 count/10m | 149 count/10m | 50 count/10m |
| 1766235098 | 0.21 Rx Erlang | 0.06 Tx Erlang | 191 count/10m | 143 count/10m | 48 count/10m |
| 1766233898 | 0.19 Rx Erlang | 0.04 Tx Erlang | 180 count/10m | 132 count/10m | 38 count/10m |
| 1766232698 | 0.22 Rx Erlang | 0.05 Tx Erlang | 199 count/10m | 151 count/10m | 40 count/10m |
| 1766231498 | 0.22 Rx Erlang | 0.05 Tx Erlang | 190 count/10m | 142 count/10m | 47 count/10m |
| 1766230299 | 0.2 Rx Erlang | 0.04 Tx Erlang | 181 count/10m | 133 count/10m | 41 count/10m |
| 1766229098 | 0.2 Rx Erlang | 0.05 Tx Erlang | 178 count/10m | 131 count/10m | 36 count/10m |
| 1766227898 | 0.21 Rx Erlang | 0.05 Tx Erlang | 204 count/10m | 48 count/10m | 47 count/10m |
| 1766226699 | 0.21 Rx Erlang | 0.05 Tx Erlang | 191 count/10m | 124 count/10m | 47 count/10m |
| 1766225498 | 0.21 Rx Erlang | 0.06 Tx Erlang | 194 count/10m | 147 count/10m | 43 count/10m |
| 1766224300 | 0.2 Rx Erlang | 0.05 Tx Erlang | 185 count/10m | 138 count/10m | 38 count/10m |
| 1766223098 | 0.21 Rx Erlang | 0.04 Tx Erlang | 191 count/10m | 143 count/10m | 36 count/10m |
| 1766221901 | 0.2 Rx Erlang | 0.05 Tx Erlang | 182 count/10m | 134 count/10m | 40 count/10m |
| 1766220699 | 0.22 Rx Erlang | 0.04 Tx Erlang | 206 count/10m | 158 count/10m | 41 count/10m |
| 1766219498 | 0.2 Rx Erlang | 0.04 Tx Erlang | 182 count/10m | 135 count/10m | 37 count/10m |
| 1766218299 | 0.22 Rx Erlang | 0.04 Tx Erlang | 204 count/10m | 133 count/10m | 41 count/10m |
| 1766217098 | 0.22 Rx Erlang | 0.04 Tx Erlang | 203 count/10m | 50 count/10m | 40 count/10m |
| 1766215900 | 0.22 Rx Erlang | 0.05 Tx Erlang | 209 count/10m | 161 count/10m | 47 count/10m |
| 1766214698 | 0.21 Rx Erlang | 0.05 Tx Erlang | 194 count/10m | 146 count/10m | 47 count/10m |
| 1766213498 | 0.2 Rx Erlang | 0.05 Tx Erlang | 185 count/10m | 138 count/10m | 43 count/10m |
| 1766212298 | 0.23 Rx Erlang | 0.05 Tx Erlang | 197 count/10m | 149 count/10m | 43 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)