APRS Track Direct

My position About ☰

reset

HS1AL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS1AL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1753728410	6 Pkt	0 Pkt	0 Pkt	-34 dBm	14.27 V
1753728410	6 Pkt	0 Pkt	0 Pkt	-31 dBm	14.27 V
1753727484	11 Pkt	0 Pkt	0 Pkt	-32 dBm	14.27 V
1753727484	11 Pkt	0 Pkt	0 Pkt	-29 dBm	14.27 V
1753726559	8 Pkt	0 Pkt	1 Pkt	-25 dBm	14.19 V
1753725633	4 Pkt	0 Pkt	0 Pkt	-25 dBm	14.19 V
1753724708	8 Pkt	0 Pkt	0 Pkt	-25 dBm	14.17 V
1753723781	5 Pkt	0 Pkt	0 Pkt	-30 dBm	14.15 V
1753722856	3 Pkt	0 Pkt	0 Pkt	-27 dBm	14.15 V
1753722856	3 Pkt	0 Pkt	0 Pkt	-28 dBm	14.15 V
1753721931	10 Pkt	0 Pkt	0 Pkt	-29 dBm	14.09 V
1753721006	-	-	-	-	-
1753721005	9 Pkt	0 Pkt	0 Pkt	-25 dBm	14.09 V
1753720081	5 Pkt	0 Pkt	0 Pkt	-40 dBm	14.23 V
1753720081	5 Pkt	0 Pkt	0 Pkt	-39 dBm	14.23 V
1753719156	9 Pkt	0 Pkt	0 Pkt	-24 dBm	14.13 V
1753718229	7 Pkt	0 Pkt	0 Pkt	-24 dBm	13.97 V
1753717303	12 Pkt	0 Pkt	0 Pkt	-25 dBm	14.13 V
1753716376	4 Pkt	0 Pkt	0 Pkt	-38 dBm	14.05 V
1753715452	3 Pkt	0 Pkt	0 Pkt	-25 dBm	13.9 V
1753714527	5 Pkt	0 Pkt	0 Pkt	-25 dBm	14.05 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)