This is the latest recevied telemetry packets stored in our database for station/object ER-DB0NMB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274422 | 0 | 0 | 0 | 0 | 0 |
| 1836274272 | 0 | 0 | 0 | 0 | 0 |
| 1766164248 | 0 | 0 | 0 | 0 | 0 |
| 1766163648 | 0 | 26 | 0 | 1 | 0 |
| 1766163048 | 0 | 22 | 0 | 3 | 0 |
| 1766162448 | 0 | 0 | 0 | 0 | 0 |
| 1766161848 | 1 | 35 | 1 | 4 | 0 |
| 1766161248 | 0 | 22 | 0 | 3 | 0 |
| 1766160648 | 1 | 41 | 1 | 6 | 0 |
| 1766160048 | 8 | 62 | 2 | 1 | 0 |
| 1766159448 | 0 | 58 | 0 | 7 | 0 |
| 1766158848 | 0 | 19 | 0 | 1 | 0 |
| 1766158248 | 0 | 39 | 0 | 5 | 0 |
| 1766157648 | 0 | 22 | 0 | 3 | 0 |
| 1766157048 | 0 | 0 | 0 | 0 | 0 |
| 1766156448 | 0 | 47 | 0 | 4 | 0 |
| 1766155848 | 0 | 0 | 0 | 0 | 0 |
| 1766155248 | 0 | 0 | 0 | 0 | 0 |
| 1766154648 | 0 | 8 | 0 | 1 | 0 |
| 1766154048 | 1 | 27 | 1 | 3 | 0 |
| 1766153448 | 0 | 0 | 0 | 0 | 0 |
| 1766152848 | 0 | 26 | 0 | 1 | 0 |
| 1766152248 | 0 | 0 | 0 | 0 | 0 |
| 1766151648 | 0 | 0 | 0 | 0 | 0 |
| 1766151048 | 0 | 8 | 0 | 1 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)