APRS Track Direct

My position About ☰

reset

DB0HGW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HGW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Efftt*
1762269790	13.83 Volt	50 Pkt	40 Pkt	92 Pcnt	63 Pcnt
1762266186	13.83 Volt	50 Pkt	30 Pkt	96 Pcnt	63 Pcnt
1762262587	13.83 Volt	50 Pkt	30 Pkt	98 Pcnt	63 Pcnt
1762258979	13.83 Volt	30 Pkt	20 Pkt	83 Pcnt	63 Pcnt
1762255376	13.83 Volt	30 Pkt	30 Pkt	92 Pcnt	63 Pcnt
1762251772	13.83 Volt	30 Pkt	20 Pkt	86 Pcnt	63 Pcnt
1762248169	13.83 Volt	40 Pkt	30 Pkt	93 Pcnt	63 Pcnt
1762244565	13.83 Volt	40 Pkt	30 Pkt	89 Pcnt	63 Pcnt
1762240962	13.83 Volt	40 Pkt	30 Pkt	96 Pcnt	63 Pcnt
1762237359	13.83 Volt	40 Pkt	30 Pkt	91 Pcnt	63 Pcnt
1762233755	13.83 Volt	30 Pkt	30 Pkt	92 Pcnt	63 Pcnt
1762230152	13.83 Volt	30 Pkt	30 Pkt	86 Pcnt	63 Pcnt
1762226548	13.83 Volt	30 Pkt	30 Pkt	90 Pcnt	63 Pcnt
1762222945	13.83 Volt	30 Pkt	30 Pkt	92 Pcnt	63 Pcnt
1762215738	13.83 Volt	30 Pkt	20 Pkt	93 Pcnt	63 Pcnt
1762208531	13.83 Volt	30 Pkt	30 Pkt	90 Pcnt	63 Pcnt
1762204927	13.83 Volt	30 Pkt	30 Pkt	88 Pcnt	63 Pcnt
1762201324	13.83 Volt	30 Pkt	30 Pkt	94 Pcnt	63 Pcnt
1762197720	13.83 Volt	30 Pkt	30 Pkt	87 Pcnt	63 Pcnt
1762194117	13.83 Volt	30 Pkt	30 Pkt	91 Pcnt	63 Pcnt
1762190513	13.83 Volt	20 Pkt	10 Pkt	78 Pcnt	63 Pcnt
1762186910	13.83 Volt	20 Pkt	10 Pkt	83 Pcnt	63 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Efftt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)