APRS Track Direct

My position About ☰

reset

DB0LSB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0LSB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274546	16.43 Volt	650 Pkt	160 Pkt	75 Pcnt
1836274397	16.35 Volt	710 Pkt	170 Pkt	75 Pcnt
1836273945	16.2 Volt	660 Pkt	150 Pkt	75 Pcnt
1762240000	16.35 Volt	500 Pkt	190 Pkt	87 Pcnt
1762239399	16.65 Volt	500 Pkt	190 Pkt	87 Pcnt
1762238799	16.28 Volt	490 Pkt	180 Pkt	88 Pcnt
1762238198	16.35 Volt	490 Pkt	180 Pkt	86 Pcnt
1762237597	16.5 Volt	480 Pkt	180 Pkt	85 Pcnt
1762236997	16.35 Volt	490 Pkt	180 Pkt	85 Pcnt
1762236396	16.35 Volt	480 Pkt	180 Pkt	83 Pcnt
1762235796	16.58 Volt	480 Pkt	180 Pkt	82 Pcnt
1762235195	16.2 Volt	490 Pkt	180 Pkt	82 Pcnt
1762234594	16.58 Volt	480 Pkt	180 Pkt	81 Pcnt
1762233995	16.35 Volt	490 Pkt	180 Pkt	83 Pcnt
1762233393	16.28 Volt	490 Pkt	180 Pkt	83 Pcnt
1762232793	16.5 Volt	480 Pkt	180 Pkt	84 Pcnt
1762232194	16.13 Volt	470 Pkt	170 Pkt	84 Pcnt
1762231591	16.35 Volt	450 Pkt	170 Pkt	83 Pcnt
1762230991	16.35 Volt	460 Pkt	170 Pkt	84 Pcnt
1762230393	16.13 Volt	440 Pkt	170 Pkt	84 Pcnt
1762229790	16.65 Volt	440 Pkt	160 Pkt	83 Pcnt
1762229191	14.48 Volt	450 Pkt	160 Pkt	84 Pcnt
1762228589	14.1 Volt	440 Pkt	160 Pkt	86 Pcnt
1762227988	16.73 Volt	460 Pkt	160 Pkt	88 Pcnt
1762227388	13.13 Volt	440 Pkt	160 Pkt	89 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)