This is the latest recevied telemetry packets stored in our database for station/object VK2RBE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Core* | Room* | Battery* | Tx* |
|---|---|---|---|---|---|
| 1758178947 | 13.5 VDC | 45.1 degC | 22.5 degC | 18.8 degC | 0 pkts |
| 1758175348 | 14.5 VDC | 46.2 degC | 23.2 degC | 18.9 degC | 0 pkts |
| 1758171751 | 13.7 VDC | 46.7 degC | 24.2 degC | 19 degC | 0 pkts |
| 1758168152 | 13.7 VDC | 47.2 degC | 24.8 degC | 18.9 degC | 0 pkts |
| 1758164554 | 13.7 VDC | 46.2 degC | 24.5 degC | 18.4 degC | 0 pkts |
| 1758160956 | 13.7 VDC | 46.2 degC | 24.2 degC | 18 degC | 0 pkts |
| 1758157360 | 13.7 VDC | 45.1 degC | 22.8 degC | 17 degC | 0 pkts |
| 1758153759 | 13.7 VDC | 42.4 degC | 20.6 degC | 15.8 degC | 0 pkts |
| 1758150163 | 13.7 VDC | 39.7 degC | 17.9 degC | 14.4 degC | 0 pkts |
| 1758146563 | 14.5 VDC | 37.6 degC | 15 degC | 13.2 degC | 0 pkts |
| 1758142965 | 14.2 VDC | 35.4 degC | 12.4 degC | 12.2 degC | 0 pkts |
| 1758139366 | 12.5 VDC | 35.4 degC | 11.8 degC | 12 degC | 0 pkts |
| 1758135768 | 12.5 VDC | 35.4 degC | 12.1 degC | 12.3 degC | 0 pkts |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
Core: 0, 0.1, 0
Room: 0, 0.1, 0
Battery: 0, 0.1, 0
Tx: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)