APRS Track Direct

My position About ☰

reset

E21CLD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E21CLD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1754192951	6 Pkt	0 Pkt	-57 dBm	13.84 V
1754191726	6 Pkt	0 Pkt	-55 dBm	13.84 V
1754190501	5 Pkt	0 Pkt	-52 dBm	13.88 V
1754189276	3 Pkt	0 Pkt	-54 dBm	13.99 V
1754188051	4 Pkt	1 Pkt	-54 dBm	14.11 V
1754186826	3 Pkt	1 Pkt	-54 dBm	15.67 V
1754185601	7 Pkt	2 Pkt	-52 dBm	15.69 V
1754184376	3 Pkt	0 Pkt	-42 dBm	13.6 V
1754183151	3 Pkt	0 Pkt	-44 dBm	13.66 V
1754181926	3 Pkt	0 Pkt	-43 dBm	13.68 V
1754180701	5 Pkt	0 Pkt	-44 dBm	13.66 V
1754179475	7 Pkt	0 Pkt	-42 dBm	13.66 V
1754178250	4 Pkt	0 Pkt	-42 dBm	13.66 V
1754177025	9 Pkt	0 Pkt	-44 dBm	13.66 V
1754175800	6 Pkt	0 Pkt	-43 dBm	13.68 V
1754175026	9 Pkt	0 Pkt	-57 dBm	13.82 V
1754173801	11 Pkt	0 Pkt	-57 dBm	13.82 V
1754172576	5 Pkt	0 Pkt	-55 dBm	13.84 V
1754171350	5 Pkt	0 Pkt	-57 dBm	13.7 V
1754170126	9 Pkt	0 Pkt	-55 dBm	13.84 V
1754168900	5 Pkt	0 Pkt	-57 dBm	13.84 V
1754167675	6 Pkt	0 Pkt	-57 dBm	13.84 V
1754166450	12 Pkt	1 Pkt	-57 dBm	13.84 V
1754165225	5 Pkt	0 Pkt	-57 dBm	13.84 V
1754164000	3 Pkt	0 Pkt	-55 dBm	13.84 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)