This is the latest recevied telemetry packets stored in our database for station/object OE3PDB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Rx10m* | Eff1h* |
|---|---|---|---|---|---|
| 1770152561 | 12.4 Volt | 60 Pkt | 0 Pkt | 7 Pkt | 73 Pcnt |
| 1770148958 | 12.4 Volt | 70 Pkt | 0 Pkt | 8 Pkt | 73 Pcnt |
| 1770145354 | 12.4 Volt | 70 Pkt | 0 Pkt | 8 Pkt | 75 Pcnt |
| 1770141751 | 12.4 Volt | 60 Pkt | 0 Pkt | 7 Pkt | 69 Pcnt |
| 1770138147 | 12.4 Volt | 50 Pkt | 0 Pkt | 11 Pkt | 63 Pcnt |
| 1770134544 | 12.48 Volt | 50 Pkt | 0 Pkt | 5 Pkt | 64 Pcnt |
| 1770130940 | 12.48 Volt | 40 Pkt | 0 Pkt | 4 Pkt | 54 Pcnt |
| 1770127337 | 12.4 Volt | 50 Pkt | 0 Pkt | 6 Pkt | 64 Pcnt |
| 1770123745 | 12.4 Volt | 50 Pkt | 0 Pkt | 5 Pkt | 64 Pcnt |
| 1770120130 | 12.4 Volt | 40 Pkt | 0 Pkt | 4 Pkt | 62 Pcnt |
| 1770116526 | 12.4 Volt | 50 Pkt | 0 Pkt | 4 Pkt | 60 Pcnt |
| 1770112923 | 12.4 Volt | 50 Pkt | 0 Pkt | 6 Pkt | 65 Pcnt |
| 1770109319 | 12.4 Volt | 40 Pkt | 0 Pkt | 4 Pkt | 64 Pcnt |
| 1770105716 | 12.4 Volt | 50 Pkt | 0 Pkt | 8 Pkt | 62 Pcnt |
| 1770102112 | 12.48 Volt | 50 Pkt | 0 Pkt | 5 Pkt | 63 Pcnt |
| 1770098509 | 12.4 Volt | 50 Pkt | 0 Pkt | 4 Pkt | 65 Pcnt |
| 1770094905 | 12.4 Volt | 40 Pkt | 0 Pkt | 6 Pkt | 70 Pcnt |
| 1770091302 | 12.4 Volt | 40 Pkt | 0 Pkt | 4 Pkt | 61 Pcnt |
| 1770087698 | 12.4 Volt | 50 Pkt | 0 Pkt | 3 Pkt | 69 Pcnt |
| 1770084095 | 12.4 Volt | 40 Pkt | 0 Pkt | 5 Pkt | 69 Pcnt |
| 1770081092 | 12.4 Volt | 0 Pkt | 0 Pkt | 3 Pkt | 71 Pcnt |
| 1770076973 | 12.48 Volt | 50 Pkt | 0 Pkt | 3 Pkt | 75 Pcnt |
| 1770073369 | 12.48 Volt | 50 Pkt | 0 Pkt | 3 Pkt | 61 Pcnt |
| 1770069766 | 12.48 Volt | 50 Pkt | 0 Pkt | 4 Pkt | 71 Pcnt |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Rx10m: 0, 1, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)