This is the latest recevied telemetry packets stored in our database for station/object NICOLI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745504203 | 167 | 85 | 8 | 62 | 145 |
| 1745500604 | 167 | 86 | 11 | 63 | 145 |
| 1745497003 | 167 | 81 | 10 | 65 | 145 |
| 1745493403 | 168 | 78 | 10 | 67 | 146 |
| 1745489803 | 168 | 76 | 10 | 66 | 147 |
| 1745486203 | 168 | 73 | 10 | 69 | 148 |
| 1745482604 | 169 | 60 | 9 | 66 | 149 |
| 1745479004 | 169 | 76 | 10 | 71 | 150 |
| 1745475404 | 169 | 74 | 8 | 68 | 150 |
| 1745471804 | 170 | 85 | 10 | 66 | 151 |
| 1745468204 | 170 | 87 | 14 | 66 | 151 |
| 1745464604 | 171 | 72 | 12 | 63 | 151 |
| 1745461004 | 174 | 72 | 8 | 68 | 150 |
| 1745457404 | 183 | 80 | 8 | 66 | 150 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)